Show Off Your Castello Pipes Here!

Log in

SmokingPipes.com Updates

3 Fresh Lasse Skovgaard Pipes
17 Fresh Brebbia Pipes
107 Fresh Savinelli Pipes
3 Fresh Ser Jacopo Pipes
8 Fresh Claudio Cavicchi Pipes

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

PipeIT

Lifer
Nov 14, 2020
5,086
30,323
Hawaii
Well I haven’t been able to track down the right 33 and I’d love any help I can get.

What I’m looking for is a 33 something like the proportions below except in an Old Antiquari finish and the size would be sub-130mm length and sub-50g.

View attachment 344888

I’ve found 33s in the size I’ve been looking for but often their shanks are too short, like these ones from Novelli and Corti, respectively.

View attachment 344887
View attachment 344885
View attachment 344891

View attachment 344886
View attachment 344892
View attachment 344889


If you see one that might fit my description, let me know!


Hmm maybe these… 🤔 I know these aren’t Old Antiquari… But they nice looking. 👀



 
Last edited:

BenMN

Lifer
Jun 21, 2023
2,150
36,714
St. Paul, MN
Here are a pair of Castello Princes (24 shape, but with a straight stem). They were a collaboration between Castello and Sykes Wilford/SmokingPipes.com. Each comes with two stems: boxwood and the traditional black acrylic. Interestingly, one of the boxwood stems is inlaid with the Castello “bar” in white, and the other has a “dot” (a tweak at Dunhill?).

There were 20 of these boxwood stem Prince-shape pipes first introduced in 2021. The smooth is stamped “03.20“ and the rusticated one is stamped “11.20 Old Antiquari.”

Which stem do you prefer?

(click on image to enlarge)
Lovely examples Mike.

For me, I think I prefer the blasted Antiquari. From there, it's a toss-up between the standard black and special boxwood stems. But for the boxwood I think I prefer the dot!
 
  • Like
Reactions: dunnyboy and Mike N

daveinlax

Charter Member
May 5, 2009
2,092
3,035
WISCONSIN
View attachment 344854
My first Castello and first expensive pipe purchase. Something about Castello just grabbed me and I’ve got a mild obsession growing for them. Just smoked it for the first time today and had a great session with a couple of coins of Escudo.
Very Nice! Perfect Lines to my eye, Awesome Blast! The shape 23 is an iconic Castello shape.
 

AroEnglish

Rehabilitant
Jan 7, 2020
5,149
15,135
#62
Hmm maybe these… 🤔 I know these aren’t Old Antiquari… But they nice looking. 👀



Or you want to get fancier with an Aristocratica.

Thank you! When I saw that first one I thought that the proportions are lovely but it’s too heavy for me. If the bowl were less girth I’d imagine it would come in under 50g.

The Collection shank is a little short relative the size of the bowl. On the Aristocrata I don’t love the plateau but everything else works. But the biggest problem with both of the pipes is my wallet 🤑
 

PipeIT

Lifer
Nov 14, 2020
5,086
30,323
Hawaii
Thank you! When I saw that first one I thought that the proportions are lovely but it’s too heavy for me. If the bowl were less girth I’d imagine it would come in under 50g.

The Collection shank is a little short relative the size of the bowl. On the Aristocrata I don’t love the plateau but everything else works. But the biggest problem with both of the pipes is my wallet 🤑

Oh my bad the first one is Old Antiquari…

Oh, you could always email Luca at Tabaccheria Corti, and tell him exactly what you are looking for, and if possible Castello is able to make it for you. He says he goes all the time to the Castello factory and hand picks out pipes for their business.
 

AroEnglish

Rehabilitant
Jan 7, 2020
5,149
15,135
#62
Oh my bad the first one is Old Antiquari…

Oh, you could always email Luca at Tabaccheria Corti, and tell him exactly what you are looking for, and if possible Castello is able to make it for you. He says he goes all the time to the Castello factory and hand picks out pipes for their business.
Thanks, I’ll do that!
 

dunnyboy

Lifer
Jul 6, 2018
2,574
32,073
New York
Well I haven’t been able to track down the right 33 and I’d love any help I can get.

What I’m looking for is a 33 something like the proportions below except in an Old Antiquari finish and the size would be sub-130mm length and sub-50g.

View attachment 344888

I’ve found 33s in the size I’ve been looking for but often their shanks are too short, like these ones from Novelli and Corti, respectively.

View attachment 344887
View attachment 344885
View attachment 344891

View attachment 344886
View attachment 344889
View attachment 344892

If you see one that might fit my description, let me know!
It's too bad the occhio di pernice from Corti isn't your size because the birdseye is pretty rare, especially for a KK. I've seen KKKKs that were much less intricate and symmetrical. The pipe is a tad short for me but compared to most of the Castellos I have, 44gm is on the light side.;)
 
  • Like
Reactions: BenMN

AroEnglish

Rehabilitant
Jan 7, 2020
5,149
15,135
#62
It's too bad the occhio di pernice from Corti isn't your size because the birdseye is pretty rare, especially for a KK. I've seen KKKKs that were much less intricate and symmetrical. The pipe is a tad short for me but compared to most of the Castellos I have, 44gm is on the light side.;)
Yeah I’ve gone back and forth on it a few times but have held the line (so far). The shank length is just an aesthetic preference I still really love the pipe as is. But it would be my most expensive pipe by a large margin so I’ve told myself that if I’m going to spend that much it should probably be a pipe that (in my eyes) is perfect. But I’m still checking on it regularly so it might convince me yet.
 
  • Like
Reactions: BlueRidge and BenMN

dunnyboy

Lifer
Jul 6, 2018
2,574
32,073
New York
Yeah I’ve gone back and forth on it a few times but have held the line (so far). The shank length is just an aesthetic preference I still really love the pipe as is. But it would be my most expensive pipe by a large margin so I’ve told myself that if I’m going to spend that much it should probably be a pipe that (in my eyes) is perfect. But I’m still checking on it regularly so it might convince me yet.
I agree with your priority. A beautiful pipe you don't enjoy smoking is a waste and once you smoke it you can't recover the cost. I have a few of those.:cry:
 
  • Like
Reactions: Tbaggins and BenMN

BenMN

Lifer
Jun 21, 2023
2,150
36,714
St. Paul, MN
Yeah I’ve gone back and forth on it a few times but have held the line (so far). The shank length is just an aesthetic preference I still really love the pipe as is. But it would be my most expensive pipe by a large margin so I’ve told myself that if I’m going to spend that much it should probably be a pipe that (in my eyes) is perfect. But I’m still checking on it regularly so it might convince me yet.
That one is in my "saved" list as well

Just curious, and I hear you on the aesthetic piece for sure... but have you tried a shorter pipe like that? I have one that I really like, and to me it doesn't seem short when I smoke it. Also, perceived weight is a function of weight + length, all else equal...

But I also agree with @dunnyboy, if it seems off to you then probably don't do it
 

AroEnglish

Rehabilitant
Jan 7, 2020
5,149
15,135
#62
That one is in my "saved" list as well

Just curious, and I hear you on the aesthetic piece for sure... but have you tried a shorter pipe like that? I have one that I really like, and to me it doesn't seem short when I smoke it. Also, perceived weight is a function of weight + length, all else equal...

But I also agree with @dunnyboy, if it seems off to you then probably don't do it
Yeah I absolutely love pipes of that size, both the look and function! My favorite is a Dunhill 320 but I've got several others that I really enjoy.

Why this one doesn't quite scratch the itch is that it's more of an oval-shanked short billiard since the shank length and stem are nearly even in length. This doesn't take away at all from how beautiful it is but it just doesn't hit the canadian proportions that I'm looking for. I want the shank length to be somewhat longer than the stem. It doesn't have to have a long shank and stubby stem like many canadians have. Even a little more shank than stem will do, like the L'Antara below.

1730209391423.jpeg

I normally haven't been quite this discerning in the past which has been fine but has led me to eventually move the pipe along. And the price of this 33 is on average 3.5 times as expensive as any of my other pipes and would be the most expensive.
 

nick24601

Might Stick Around
Jan 19, 2020
52
329
My first Castello. A castello "castello" KK made most importantly in 2016 when my daughter was born. I haven't smoked it yet but once I find a virginia perique blend that works for me since Escudo changed their recipie and it bites my toung now, this pipe will be dedicated to it1000000245.jpg
 

Attachments

  • 20241029_141450.jpg
    20241029_141450.jpg
    151.6 KB · Views: 15
  • 20241029_141504.jpg
    20241029_141504.jpg
    94.3 KB · Views: 14
  • 20241029_141538.jpg
    20241029_141538.jpg
    112.6 KB · Views: 14

PipeIT

Lifer
Nov 14, 2020
5,086
30,323
Hawaii
@AroEnglish best to take your time, even if it takes a year or two.

Crap, I’m not sure how I’ll ever buy a Castello now, as I need to use a filter. But, I plan to get the meerschaum bowl filters @Said.ALTINAY makes to put at the bottom of the chamber, on my pipes that don’t have filters, and I hope this works.