Show Off Your Petersons Here!

Log in

SmokingPipes.com Updates

36 Fresh Rossi Pipes
New Cigars
6 Fresh Bruno Nuttens Pipes
18 Fresh Estate Pipes
48 Fresh Vauen Pipes

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

Swiss Army Knife

Can't Leave
Jul 12, 2021
464
1,358
North Carolina
Finally got this Heritage Christmas Spigot XL11. Was really taken by these and was excited to get this one.
002-029-82153.4033.jpg

However I'm really torn on this pretty obvious fill on it's face.

20221016_024903.jpg

It's got some beautiful grain and I'm happy with everything else but the fill being so mismatched from the stain is bugging me. Especially since it was almost impossible to see in the SP picture.

SP US is currently sold out of all the Heritage Spigot XL11s and I don't know if they'll be getting more or not. I suppose I'd rather have an imperfect pipe than none at all but still. Should I send it back and hope for a restock? Or am I obsessing over details?
 
Jul 26, 2021
2,418
9,814
Metro-Detroit
Finally got this Heritage Christmas Spigot XL11. Was really taken by these and was excited to get this one.
View attachment 175363

However I'm really torn on this pretty obvious fill on it's face.

View attachment 175364

It's got some beautiful grain and I'm happy with everything else but the fill being so mismatched from the stain is bugging me. Especially since it was almost impossible to see in the SP picture.

SP US is currently sold out of all the Heritage Spigot XL11s and I don't know if they'll be getting more or not. I suppose I'd rather have an imperfect pipe than none at all but still. Should I send it back and hope for a restock? Or am I obsessing over details?
Call and ask. Phone communication is probably key here (and there's time for another drop, although I don't know for sure, since it's not even Halloween).

I'd be a little hot (and not in the good way) if I were you. SPC has great customer service, so pick up the phone and talk to someone before making a decision.
 

Piping Abe

Part of the Furniture Now
Oct 27, 2021
604
1,695
North Dakota, USA
Finally got this Heritage Christmas Spigot XL11. Was really taken by these and was excited to get this one.
View attachment 175363

However I'm really torn on this pretty obvious fill on it's face.

View attachment 175364

It's got some beautiful grain and I'm happy with everything else but the fill being so mismatched from the stain is bugging me. Especially since it was almost impossible to see in the SP picture.

SP US is currently sold out of all the Heritage Spigot XL11s and I don't know if they'll be getting more or not. I suppose I'd rather have an imperfect pipe than none at all but still. Should I send it back and hope for a restock? Or am I obsessing over details?

You should be able to order one direct from Petersons website for the same price as Smokingpipes. Just have to wait longer for shipping. If you get another dud though, your kinda screwed at that point. But it is an option. Also check Smoking pipes EU
 
  • Like
Reactions: Swiss Army Knife

HawkeyeLinus

Lifer
Oct 16, 2020
5,857
42,248
Iowa
Call and ask. Phone communication is probably key here (and there's time for another drop, although I don't know for sure, since it's not even Halloween).

I'd be a little hot (and not in the good way) if I were you. SPC has great customer service, so pick up the phone and talk to someone before making a decision.
Remember, the person on the other end of the phone didn't inspect the pipe! Totally agree they are top notch customer service.

There is likely another drop, and maybe a few, and could be one on SP EU, they keep showing up on both sites and it is a long way to Christmas Or you could get lucky with one of those little stain matching pens, it wouldn't be my solution, but if you got lucky . . .

I got sucked back in the other night by a Christmas rusticated No. 127, I like the first Christmas pipe I ordered so much and wanted that shape and was resisting when I hadn't seen one for a bit. Along with some old Britwood, this week will be pipe week!
 

Piping Rooster

Can't Leave
Jun 29, 2022
398
2,082
Champa Bay
Finally got this Heritage Christmas Spigot XL11. Was really taken by these and was excited to get this one.
View attachment 175363

However I'm really torn on this pretty obvious fill on it's face.

View attachment 175364

It's got some beautiful grain and I'm happy with everything else but the fill being so mismatched from the stain is bugging me. Especially since it was almost impossible to see in the SP picture.

SP US is currently sold out of all the Heritage Spigot XL11s and I don't know if they'll be getting more or not. I suppose I'd rather have an imperfect pipe than none at all but still. Should I send it back and hope for a restock? Or am I obsessing over details?
I have the same one that also has (2) fills. I agree that they could be better matched. I will say that it is a wonderful smoker and really light for it's size.20221016_122127.jpg20221016_122000.jpg
 

ChonkyTonks

Part of the Furniture Now
Jul 14, 2022
800
5,847
Philly
I recently won an ebay auction for a Peterson Emerald 53 Smooth pipe. Apparently, it was purchased back in the 90's. Beautiful pipe. I do have a question for the team here: The draw on it is not great. It is something to do with the stem. It is a p-lip and I ran a few pipe cleaners through it. Is it normal for the draw to be the equivalent of over-packing your pipe?

tempImagev5aNN0.jpg
 

ChonkyTonks

Part of the Furniture Now
Jul 14, 2022
800
5,847
Philly
I recently won an ebay auction for a Peterson Emerald 53 Smooth pipe. Apparently, it was purchased back in the 90's. Beautiful pipe. I do have a question for the team here: The draw on it is not great. It is something to do with the stem. It is a p-lip and I ran a few pipe cleaners through it. Is it normal for the draw to be the equivalent of over-packing your pipe?

View attachment 176419
Nevermind on the question. I ran some alcohol-loaded pipe cleaners through it. Lots of buildup in the stem that is now gone.
 

CascadianFyn

Lurker
Oct 17, 2022
19
48
PacNW
Just got my first Peterson pipe: Aran 127 Nickel Band
The stem was fairly loose right out of the box, just a light tug and it came right out. Not sure if that is a Peterson thing since this is my first one. After a couple of smokes it seems to be tightening up a bit.
I wanted to try a PLip, which I'm getting used to. I like the lower heat but it's harder to get the flavors on the tongue.
It's a nice looking pipe but feels a bit dainty, very lightweight and not much mass to it. Feeling a bit of buyer's remorse but maybe it will grow on me more with time. It smokes well.
20221021_124528.jpg
 

FLDRD

Lifer
Oct 13, 2021
2,330
9,514
Arkansas
Just got my first Peterson pipe: Aran 127 Nickel Band
The stem was fairly loose right out of the box, just a light tug and it came right out. Not sure if that is a Peterson thing since this is my first one. After a couple of smokes it seems to be tightening up a bit.
I wanted to try a PLip, which I'm getting used to. I like the lower heat but it's harder to get the flavors on the tongue.
It's a nice looking pipe but feels a bit dainty, very lightweight and not much mass to it. Feeling a bit of buyer's remorse but maybe it will grow on me more with time. It smokes well.
View attachment 176428
I think the P-lip and lightness of the pipe will both grow on you. It looks nice too.