I've seen a lot of pipe makers lately attaching magnetic pipe stems. Does anyone here own one? Are there any downsides? Seems like a cool idea. ?
Magnetic Pipe Stems ?
- Thread starter JMcQ
- Start date
PipesMagazine Approved Sponsor
Site Sponsors
PipesMagazine Approved Sponsor
PipesMagazine Approved Sponsor
PipesMagazine Approved Sponsor
PipesMagazine Approved Sponsor
I have two on the way from Josh Ronish at Dragon Briars. Anyone wondering can find videos on his instagram page. High powered magnet connection between stem and shank rather than a mortise/tenon setup. The pipes are also cool because the magnets make the pipe magnetic in general. If you need to set it down you can just slap it up on the side of a tool chest if you so choose.
In addition, the lack of a tenon allows one to remove the stem from the pipe while smoking if you should need to, without risking any kind of damage or deformity to the stem.
In addition, the lack of a tenon allows one to remove the stem from the pipe while smoking if you should need to, without risking any kind of damage or deformity to the stem.
Don't know yet, he is in the process of making mine. Although according to him, and a few people who have bought them so far, there are no issues. The magnets are quite strong, they will grab the stem from a half inch away and suck it on like WHAP!
Mechanical watches, you say? My, how time will fly after a smoke with a strong magnetic stem!
I like this idea, if it will work with me.
I like this idea, if it will work with me.
I would think they might work. One caution, when high powered magnets are allowed to strike together with much force, they can chip or crack which could be a problem down the road as well as an eye injury hazard. A super thin cork washer, like you might find in a brass instrument valve, would probably mitigate a lot of that issue.
This is the first one that came up in my Google search. Magnetic Pipe Stem At that price I’m guessing it’s been heavily tested...and that’s the cheaper of the 2 I saw by almost half. ?
Sounds like one of them newfangled innovation things. I'm delicate and such things frighten me.
Those are on the way out. Card readers around here are starting to include phone readers."Sorry sir, your credit card is declined."
See Viktor Yashtylov for the high-end master with magnetic stems: Viktor Yashtylov Tobacco Pipes | Buy Viktor Yashtylov Tobacco Pipes at Smokingpipes - https://www.smokingpipes.com/pipes/new/viktor-yashtylov/. Doing away with the mortise-tenon opens up the design possibilities. Viktor's shank/stem interfaces are all kinds of asymmetrical. I wish I can afford a Yashtylov. I'd also like to see if getting rid of the mortise-tenon joint improves the smoke.
I've seen them for a few years now. Seems like too much distance between stem contact and the draft hole would cause gurgle.
No matter the innovation, smoking a tobacco pipe in the 21st century automatically makes the practice an anachronism.
Do these magnets also have healing properties, or do I need to insist on crystal inlays for my next commissioned pipe?
Namaste. It will be sufficient for you to add sage to your smoking mixture.
I've got one with an entire mortise made of lapis lazuli, no beneficial effects noted.
