Wring out the Full Virginia Flake

Log in

SmokingPipes.com Updates

18 Fresh Barling Pipes
6 Fresh Jacono Pipes
6 Fresh Ardor Pipes
24 Fresh Brulor Pipes
12 Fresh Nørding Pipes

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

seanv

Lifer
Mar 22, 2018
3,115
11,148
Canada
FVF is one of my favorites. I haven't been too into Virginia's lately but it may be time to break open an aged tin
 

warren

Lifer
Sep 13, 2013
12,362
18,596
Foothills of the Chugach Range, AK
So when someone says something unbelievable, people would say "is the Pope Polish or what?"
"Does a bear shit in the woods?" Is a favorite up here. Don't know why. Bears seem to shit wherever they want. Who's is to tell them no? My front yard seems to be a favored latrine. Seriously, I'm not trying to hi-jack the thread. Me bad!
 

ParkitoATL

Can't Leave
Mar 11, 2023
404
1,477
Atlanta, GA
I find many of these, such as Sam's Flake, rub out and smoke very easily, but here are a couple of tricks for the more stubborn GH and SG flakes.

First, I will often take some flakes, air them for a bit, then put them in a small Tupperware for a few days, which seems to liberate excess moisture.

Second, rub out by hand, then take any of the larger chunks that won't rub out and put them in a weed grinder and grind well. Mix the two batches back together and you'll have a blend that burns nice and cool with minimal relights.
 

BingBong

Lifer
Apr 26, 2024
1,504
6,404
London UK
It's the British way with tobacco, I think. Forty or fifty years ago, I would buy RYO like Golden Virginia and it was so wet on opening, the Rizla would fall apart. Once open, it would dessicate pretty fast; half ounce and ounce packets would be dust by the end, two ounce tins took a bit longer to dry but still did. A guy I worked with had the answer, open a two ounce tin in the morning and finish it within 24 hours.. not sure that he's still with us...
 

milk

Lifer
Sep 21, 2022
1,121
2,903
Japan
Ditto. I found the stuff a real pain to keep lit, even after drying.
I have some I’m trying to age for a decade. My plan is to see if it’s easier to light in ten years. That’s about when I expect to feel like making the effort again to tackle FVF. In the meantime, I have Peterson Flake which lights with no effort.
 

elvishrunes

Can't Leave
Jun 19, 2017
390
759
It’s also batch specific. My last batch of Ennerdale (same company) was huge dense flakes that were pretty dry and didn’t burn well until I figured it out. This new one is all broken flake (even in the tin) that feels pretty moist, but burns easily, go figure. Basically shred them finer than other flakes and they should burn well, even wet, but drying helps.
 

minerLuke

Starting to Get Obsessed
Jan 2, 2023
296
591
Vancouver BC
Full Virginia Flake is still one of my favorite VA tobaccos, probably top 3. I think the hype is generally warranted but it does take a bit of fooling around trying a few techniques to unlock it for you and make you go wow!

I have tried pretty much everything and now having managed to smoke a couple pounds of it, I now just fold and stuff it as it comes from the tin. I've dried it right out and while that does make it easier to smoke, for me dried out it loses something in the depth of flavour. I just adjust my pack and cadence to suit the moisture level.

The biggest difference maker I've found is to get it light easily. Full Virginia Flake (like most Gawith flakes) can be hard to light, especially if it is a little moist, and if your scorching it to try and get it going that tends to give you either some tongue bite, or diminishes the flavour of the tobacco. The simplest way I've found is to light it with some 'tinder'. I load the bowl fold and stuff about 3/4 to 7/8 full leaving a bit of room to sprinkle a pinch of dry, finely crumbled Virginia ribbon or finely crumbled flake. Just whatever I have handy, something like Mac Baren, or Peter Stokebye LNF etc. I find using something dry and easy to light will help to get the FVF (or any stubborn flake) going fairly easily resulting in a much easier and flavourful smoke. It really helps to get the best out of the Kendal flakes.
 

Choatecav

Part of the Furniture Now
Dec 19, 2023
564
1,542
Middle Tennessee
Full Virginia Flake is still one of my favorite VA tobaccos, probably top 3. I think the hype is generally warranted but it does take a bit of fooling around trying a few techniques to unlock it for you and make you go wow!

I have tried pretty much everything and now having managed to smoke a couple pounds of it, I now just fold and stuff it as it comes from the tin. I've dried it right out and while that does make it easier to smoke, for me dried out it loses something in the depth of flavour. I just adjust my pack and cadence to suit the moisture level.

The biggest difference maker I've found is to get it light easily. Full Virginia Flake (like most Gawith flakes) can be hard to light, especially if it is a little moist, and if your scorching it to try and get it going that tends to give you either some tongue bite, or diminishes the flavour of the tobacco. The simplest way I've found is to light it with some 'tinder'. I load the bowl fold and stuff about 3/4 to 7/8 full leaving a bit of room to sprinkle a pinch of dry, finely crumbled Virginia ribbon or finely crumbled flake. Just whatever I have handy, something like Mac Baren, or Peter Stokebye LNF etc. I find using something dry and easy to light will help to get the FVF (or any stubborn flake) going fairly easily resulting in a much easier and flavourful smoke. It really helps to get the best out of the Kendal flakes.
While there is a bit more work to your method, I must say the description of the benefits makes it tempting. Thanks.