Member Weezell (aka Dave) sent me four pipes from his fathers estate to clean up. They belonged to a friend of his fathers and have a lot of sentimental value to Dave.
First up was this massive Charatan Special billiard. I've seen these specials before, but they almost always have a saddle stem. This one has a lovely tapered stem. The pipe is 7" long and exactly 100 grams, what a hefty hunk of briar. This one is a shape 44 and has the Lane stamp.
The tars on top came off with some light scrubbing. I soaked the stem and removed some stubborn oxidation. I stayed away from the CP stamp. It is light, but visible. I did not soak the bowl on this one, just gave it a light reaming. The owner smoked all of these pipes very hot and did a good bit of damage inside the bowl. I was afraid to remove the cake filling in the holes. With a little use, the cake should build over these spots and the pipe should still have a long life, the briar is still very thick all over. There were a few dents on the bottom of the bowl, but they lifted out nicely with a hot knife and wet cloth.
Paired with a 4K Castello to give you a perspective on the size of the pipe:
Before:
After:
Next up was a pipe stamped "Sherlock" and Made in Italy. This one has a perspex stem, that had some stubborn staining. I removed a good bit but not all of the stain in the perspex. The briar has a lovely golden glow with some faceted features on the bowl (ala Willmer?). I'm not familiar with this brand, but the briar is beautiful. The tars on top came off, just leaving a light scorch mark on the inner bowl rim.
Before:
I'm working on the other two today. One is a lovely Savinelli Autograph and a no-name, massive English made billiard.
First up was this massive Charatan Special billiard. I've seen these specials before, but they almost always have a saddle stem. This one has a lovely tapered stem. The pipe is 7" long and exactly 100 grams, what a hefty hunk of briar. This one is a shape 44 and has the Lane stamp.
The tars on top came off with some light scrubbing. I soaked the stem and removed some stubborn oxidation. I stayed away from the CP stamp. It is light, but visible. I did not soak the bowl on this one, just gave it a light reaming. The owner smoked all of these pipes very hot and did a good bit of damage inside the bowl. I was afraid to remove the cake filling in the holes. With a little use, the cake should build over these spots and the pipe should still have a long life, the briar is still very thick all over. There were a few dents on the bottom of the bowl, but they lifted out nicely with a hot knife and wet cloth.
Paired with a 4K Castello to give you a perspective on the size of the pipe:
![](http://inlinethumb19.webshots.com/49554/2976693830062237293S500x500Q85.jpg)
Before:
![](http://inlinethumb62.webshots.com/48637/2996252260062237293S500x500Q85.jpg)
![](http://inlinethumb41.webshots.com/49128/2507786090062237293S500x500Q85.jpg)
After:
![](http://inlinethumb21.webshots.com/50196/2158341570062237293S500x500Q85.jpg)
![](http://inlinethumb47.webshots.com/49198/2055320010062237293S500x500Q85.jpg)
![](http://inlinethumb09.webshots.com/49672/2820794310062237293S500x500Q85.jpg)
Next up was a pipe stamped "Sherlock" and Made in Italy. This one has a perspex stem, that had some stubborn staining. I removed a good bit but not all of the stain in the perspex. The briar has a lovely golden glow with some faceted features on the bowl (ala Willmer?). I'm not familiar with this brand, but the briar is beautiful. The tars on top came off, just leaving a light scorch mark on the inner bowl rim.
Before:
![](http://inlinethumb25.webshots.com/51672/2719431340062237293S500x500Q85.jpg)
![](http://inlinethumb41.webshots.com/50536/2900467400062237293S500x500Q85.jpg)
I'm working on the other two today. One is a lovely Savinelli Autograph and a no-name, massive English made billiard.