Stripped Threads On A Meerschaum Shank.

[tenton]

I'd try Teflon tape as it's easily reversible if it doesn't work.

 

[mso489]

Ah, the late great fish'n'banjo sent me my one and only Meerschaum that I enjoy for its clarity and definition of flavors -- it's a straight billiard with grape vine etchings on the bowl. For repair of your pipe, an odd idea came to mind that you need to scrutinize, as I'm sure you would. Since there are threads involved, if they are tracking at all but not tightening, I wonder if plumber's tape would secure them. If it were my pipe, I'd prefer a regular push-in stem, but that would take some know-how working with Meer. I sent fish' back a tin of Escudo he said was one of his favorites. Oops, I see others have the same idea ... great minds.

 

[Sloopjohnbee]

Ah, the late great fish'n'banjo sent me my one and only Meerschaum that I enjoy for its clarity and definition of flavors -- it's a straight billiard with grape vine etchings on the bowl. For repair of your pipe, an odd idea came to mind that you need to scrutinize, as I'm sure you would. Since there are threads involved, if they are tracking at all but not tightening, I wonder if plumber's tape would secure them. If it were my pipe, I'd prefer a regular push-in stem, but that would take some know-how working with Meer. I sent fish' back a tin of Escudo he said was one of his favorites. Oops, I see others have the same idea ... great minds.

Does yours have a threaded tenon? What's it made of?

 

[condorlover1]

Send it to Briarville as they are the Condor/Weezell officially endorsed 24 hour meerschaum repair shop! I remember Fish and Banjo beat me to a very old 'cutty' on Ebay once and then published pictures of him smoking it! I have not seen that surface for sale and if it does I would very much like to purchase it not only as a memento of a truly great man but as a gift for a chum of mine. If anyone knows anything about it please do PM me.

 

[mso489]

wintergarden, yes my Meer has a threaded tenon of some kind of synthetic, perhaps plastic but looks a bit like silicone. I replaced the little gasket between the stem and the shank with a small plastic ring off some kind of packaging, to make it more secure, after trying a ring of felt that I made myself that didn't tighten as securely. I was pleased to finally smoke a Meer and appreciate its special traits. I had an interesting go around with an assistant at my local pipe shop who tried to pull a guilt trip when I said I'd cleaned out the Meer under the tap. This had been mentioned on Forums as acceptable, so I barely blinked, and the pipe shop owner tacitly agreed by not joining in. So I've had some good adventures with my Meer.

 

[JimInks]

Mine has the same kind of tenon that MSO's meer has.

 

[anotherbob]

If I get to the state he resides in he'll always remember the visit.

you're a lot nicer then you seem like on here. If he can crawl away from the encounter that would be classified as mercy.

 

[jhowell]

Briarville Tobacco Pipe Repair & Restoration - Briarville.com

Hello Folks. This is Rich Messineo, owner and operator of Briarville, Inc. Thanks to you, my clients, I am 100% booked out thruough the end of 2024 on pipe

briarville.com

+1

 

[ashdigger]

you're a lot nicer then you seem like on here. If he can crawl away from the encounter that would be classified as mercy.

I was trying to be kinder. It took four edits to type that. The first draft referenced “gator food”

 

[Boychek]

Mine has the same kind of tenon that MSO's meer has.

Dear Jiminks, I have the type described by MSO, but in 9mm. I off the screw on the delrin; then, put the delrin that been in the meerschuam block itself into the stem; and, applied teflon tape
about the delrin to have an easy secure stem to mortise fit. As I believe that your pipe isn't a 9mm, you could insert a 9mm adapter (i.e., converter from 9mm to 3mm).

Now, if the inner dimensions of your delrin insert don't present the good fortune that i had,
here's something in the aftermarket that may do the trick:

2Pcs white MUXIANG Screw Tenon and Pluggable Link stem, Special for Meerschaum smoking Pipe Making/Repairing jd0021| | - AliExpress

www.aliexpress.com

The very best to you; and, thank you for all the countless hours that i've enjoyed
reading your comments and reviews plus your great interviews.

Yours truly, boychek

 

[JimInks]

Dear Jiminks, I have the type described by MSO, but in 9mm. I off the screw on the delrin; then, put the delrin that been in the meerschuam block itself into the stem; and, applied teflon tape
about the delrin to have an easy secure stem to mortise fit. As I believe that your pipe isn't a 9mm, you could insert a 9mm adapter (i.e., converter from 9mm to 3mm).

Now, if the inner dimensions of your delrin insert don't present the good fortune that i had,
here's something in the aftermarket that may do the trick:

2Pcs white MUXIANG Screw Tenon and Pluggable Link stem, Special for Meerschaum smoking Pipe Making/Repairing jd0021| | - AliExpress

www.aliexpress.com

The very best to you; and, thank you for all the countless hours that i've enjoyed
reading your comments and reviews plus your great interviews.

Yours truly, boychek

Thank you for the information, and the very kind compliments.

 

[weezell]

Send it to Briarville as they are the Condor/Weezell officially endorsed 24 hour meerschaum repair shop!

Yep! He is the go to guy for Meers...

 

[Sloopjohnbee]

On this topic - Anyone on here know if it would be suitable to use a thin layer(if you can fit it) of teflon/umhw tape as lubricating buffers of metal thread systems, for all the time use? I feel like it is useful to protect and guard from stripping - on the other hand it can cause pressure issues, heat issues, swelling and cracking ; advisable or only when necessary - what do you think?