You know what they say "You have to SPEND in order to SAVE"
Show off Your Ropp Pipes here!
- Thread starter didimauw
- Start date
SmokingPipes.com Updates
Watch for Updates Twice a Week
PipesMagazine Approved Sponsor
Site Sponsors
PipesMagazine Approved Sponsor
PipesMagazine Approved Sponsor
PipesMagazine Approved Sponsor
PipesMagazine Approved Sponsor
Disaster strikes! I had my first pipe casualty earlier this week. I was gently removing the stem from my J06 and heard a little snick sound. Sure enough, the shank had cracked along the left side, almost to the bowl. I had finished smoking the pipe about an hour prior and figured it was sufficiently cooled down. I had removed the stem a few times previously to inspect the drilling, and to enlarge the draft hole. It felt nice and smooth, not tight at all. I try to keep stem removal to a minimum but figured it was time to clean the mortise with a Q tip and alcohol.
I don't have a pic of the crack because I was pissed off and threw the pipe in the trash. It wasn't my favorite pipe, and it wasn't very expensive at a little over $50 on sale, so i figured it was not worth trying to repair, considering how long the crack was. Maybe the pipe needed more cooling time. Some people here claim to remove stems from hot and warm pipes all the time with no issues. I just wanted to give you guys with J06's and J04's a heads up. These are dainty, super light pipes, and may need to be babied more than other pipes.
I don't have a pic of the crack because I was pissed off and threw the pipe in the trash. It wasn't my favorite pipe, and it wasn't very expensive at a little over $50 on sale, so i figured it was not worth trying to repair, considering how long the crack was. Maybe the pipe needed more cooling time. Some people here claim to remove stems from hot and warm pipes all the time with no issues. I just wanted to give you guys with J06's and J04's a heads up. These are dainty, super light pipes, and may need to be babied more than other pipes.
I'm not even on time for this sale and this link has me eyeing some new Vintage pipes...
Below is another Eugène-Léon Ropp Cherry pipe with natural horn stem stamped “Bussang,” from Ropp’s original workshop there between 1870–1893 that you would not have seen from me (it’s unsmoked, so would not have been posted in a WAYS thread). It has an intricate ”Oriental” carved dragon motif. The threads of the extant shank do not fit the stummel (too small); I suspect there was another shank extension with larger threads and this pipe was originally significantly longer. Visually, this length/proportion doesn’t seem bad to my eye. I affixed a 1/32" strip of wind instrument cork to the shank threads to make the fit snug—the pipe is smokable as a result, although I’ll more than likely keep its virginity preserved; were it not for the split to the front right of the stummel and the missing shank piece, I think this would be museum worthy.
Looks to have come out of an Asian workshop rather than French.
Reminiscent of Chinese or Japanese carvings eg this ivory piece from HK
Whatever, it is a fine piece of work
And I'm with you - I wouldn't set fire to it.
Last edited:
Sometimes you come across pipes you didn't realize you needed lol.I'm not even on time for this sale and this link has me eyeing some new Vintage pipes...
I got my only Ropp on ebay some years back. It's got a conical chamber, comfortable vulcanite, passes a cleaner and is a nice clencher. Rustic. I've got a MM Maple pot that has similar bark but it goes all around.
DeLuxe Cherrywood
DeLuxe Cherrywood
The same thing actually happened to my J04. I seem to have trouble learning not to separate pipes by holding onto the bowl and stem, rather than the shank and stem, so a few of my pipes (mostly cobs) have hairline cracks in the shank.
To address it, I coated the tenon with plenty of soft wax, reinserted it, and wicked thin superglue into the crack. Consider that next time instead of throwing the pipe out!
Here is my Ropp Vintage Stout apple. Love this pipe. I had a couple of other ones, which I let go. Now eyeing another Vintage Stout.
Adding another acorn to the collection. One of my favorite shapes, this one is a superior with nice flame grain and a little smaller In proportion to the one above.
Snagged a vintage stout squat bulldog. I rubbed some briar balm onto it and it brought out a deeper red which is really nice, this and the other vintage stout pipe I have tended to look a bit yellow in an unappealing way when I first got them but they’re turning out to be great little pipes.
I only have one other Ropp a churchwarden I because of a recommendation from Chasing Embers to a churchwarden inquiry. I just picked up this Ropp Cutty and gave it a test drive yesterday. Being a veterinarian and going in and out of peoples barns this is the perfect pipe. it's a good quick smoke while driving from one appointment to another, and smokes as good as my Falcon. Thanks, Embers, for introducing me to the Ropp.
I like that little guy! Extra points for a pup in the picture!
Wasn't going to buy anymore pipes. ESPECIALLY wasnt going to buy anymore Ropps. But I'm leaning heavily toward full bent pipes, AND I've never smoked an Algerian briar before. So it was necessary.
O
I'm working on justifying another small pete with a Rhodesion bowl and longish reading stem, but I too will assuredly be returning to Roppland. Can't live without another J16 in rusticated finish!
Oh, methinks you ain't finished yet!!
I'm working on justifying another small pete with a Rhodesion bowl and longish reading stem, but I too will assuredly be returning to Roppland. Can't live without another J16 in rusticated finish!
Looking back, I wish I had tried to repair it. It was a nice little pipe, good for a short smoke. It stayed upright when set down on a table.
PS:
Thanks for the tip. If I ever crack another shank I will give your fix a try.
Last edited:
Couple of lil fellers
Vintage Ropp Cherrywood
Ropp Gargantua Paneled Bent Dublin
Vintage Ropp Cherrywood
Ropp Gargantua Paneled Bent Dublin