Greetings friends.
It's been one heckuva week, one of those weeks where life just seems to take over. As a reward for making it through, I've taken a holiday today to restore a beautiful old pipe that has been sitting on my bench for a month or so. This was another $14.00 eBay win, and one I was thrilled about. I started looking for early Kaywoodies about a year ago when I fell in love with the quality of the briar. This lovely little author was in pretty good shape. The drinkless stinger, with 4 holes, and a two digit shape code with one letter dates it to between 1940 and the early 1950s. There was a sizable tooth mark in the top of the stem, a couple smaller bites out of the bottom of the bit, and a few small dings and dents in the bowl. Other than that, the pipe was in pretty good shape.
So I threw the stem in an OxyClean bath, and then took the new PipNet reamer to the cake.
I then wet a tea towel and set the bowl rim down on the towel for two minutes or so, before using the damp towel to wipe off the rim char and tars.
Once that was done, I wet sanded the stem with 600 and 800 grit sandpaper.
Then took the heat gun to the stem to work on those dents.
It took a couple attempts, but they both lifted somewhat.
Then I took 0000 steel wool to the stinger to clean it up.
Following the stinger, I elected to do a surface clean of the stummel with acetone and a cotton pad.
At this point, it was time to make some judgement calls. There was still some rim darkening, there were a couple very minor dents in the bowl, and that tooth mark was still there even after the heat treatment and there was a little bleaching around the top of the bowl. This pipe is for me. I'm a clencher. I elected to leave the tooth mark. I also elected to leave the dents, and do a light tint of the bowl to bring back the colour.
The next step was a date with about fifty pipe cleaners and the same number of bristle cleaners liberally dosed with isopropyl alcohol. After a thorough scrub out, I elected to finish the stem, shank and stummel clean with a retort.
Testament to the fact that isopropyl alcohol and pipe cleaners don't clean out everything, here are the cotton balls from the bowl post retort.
Post retort, I added two drops of Fiebing's Light Brown to about half an eye dropper of 99% isopropyl alcohol. I do this to create tints. I don't always want to restain a pipe, the tint allows me to blend the stain and bring colour back to the bleached areas of the stummel.
After adding the tint, I used a cotton ball with isopropyl alcohol to wipe down the stummel and even out the tint.
Then the pipe went to the buffer. First with white diamond...
Then with Carnauba...
Then after a wipe down with a Dunhill Pipe Wipe...
I love this pipe. I'm thrilled to have it, and can't wait to smoke it.
Right now I'm having one of these to celebrate.
As always, thanks for looking, and feel free to toss any tips my way.
Cheers,
-- Pat
It's been one heckuva week, one of those weeks where life just seems to take over. As a reward for making it through, I've taken a holiday today to restore a beautiful old pipe that has been sitting on my bench for a month or so. This was another $14.00 eBay win, and one I was thrilled about. I started looking for early Kaywoodies about a year ago when I fell in love with the quality of the briar. This lovely little author was in pretty good shape. The drinkless stinger, with 4 holes, and a two digit shape code with one letter dates it to between 1940 and the early 1950s. There was a sizable tooth mark in the top of the stem, a couple smaller bites out of the bottom of the bit, and a few small dings and dents in the bowl. Other than that, the pipe was in pretty good shape.
So I threw the stem in an OxyClean bath, and then took the new PipNet reamer to the cake.
I then wet a tea towel and set the bowl rim down on the towel for two minutes or so, before using the damp towel to wipe off the rim char and tars.
Once that was done, I wet sanded the stem with 600 and 800 grit sandpaper.
Then took the heat gun to the stem to work on those dents.
It took a couple attempts, but they both lifted somewhat.
Then I took 0000 steel wool to the stinger to clean it up.
Following the stinger, I elected to do a surface clean of the stummel with acetone and a cotton pad.
At this point, it was time to make some judgement calls. There was still some rim darkening, there were a couple very minor dents in the bowl, and that tooth mark was still there even after the heat treatment and there was a little bleaching around the top of the bowl. This pipe is for me. I'm a clencher. I elected to leave the tooth mark. I also elected to leave the dents, and do a light tint of the bowl to bring back the colour.
The next step was a date with about fifty pipe cleaners and the same number of bristle cleaners liberally dosed with isopropyl alcohol. After a thorough scrub out, I elected to finish the stem, shank and stummel clean with a retort.
Testament to the fact that isopropyl alcohol and pipe cleaners don't clean out everything, here are the cotton balls from the bowl post retort.
Post retort, I added two drops of Fiebing's Light Brown to about half an eye dropper of 99% isopropyl alcohol. I do this to create tints. I don't always want to restain a pipe, the tint allows me to blend the stain and bring colour back to the bleached areas of the stummel.
After adding the tint, I used a cotton ball with isopropyl alcohol to wipe down the stummel and even out the tint.
Then the pipe went to the buffer. First with white diamond...
Then with Carnauba...
Then after a wipe down with a Dunhill Pipe Wipe...
I love this pipe. I'm thrilled to have it, and can't wait to smoke it.
Right now I'm having one of these to celebrate.
As always, thanks for looking, and feel free to toss any tips my way.
Cheers,
-- Pat
: