Interesting Completed Ebay Auctions - British Pipes

Log in

SmokingPipes.com Updates

12 Fresh Radice Pipes
New Cigars
9 Fresh Dunhill Pipes
3 Fresh Bill Shalosky Pipes
120 Fresh Savinelli Pipes

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

sablebrush52

The Bard Of Barlings
Jun 15, 2013
20,999
50,298
Southern Oregon
jrs457.wixsite.com
Thanks. I found info on Pipedia that said after the factory closed, they were made by Charatans, Oppenheimer and other unknown companies. So I'll add this 'non-Barling Barling' to my collection that also includes a couple of 'Barling non-Barling'. I think I only have two actual "Barling's made by Barling's".

My toes have been dipped and I'm pulling them out of the water.
I supplied that info on Pipedia. The Oppenheimer sourcing was confirmed for me by its former CEO, John Adler, a few months before he passed away. Most of the Charatans are easy to spot since they made their "Barlings" using their own shapes
 

runscott

Lifer
Jun 3, 2020
1,294
2,841
Washington State
I supplied that info on Pipedia. The Oppenheimer sourcing was confirmed for me by its former CEO, John Adler, a few months before he passed away. Most of the Charatans are easy to spot since they made their "Barlings" using their own shapes
These two have the same dimensions as the Charatans shape 502.

Still need to do a little chamber work, but it's basically done. No major problems - stem dents minimal, black on outside of bowl came right off.

drmXb9i.jpeg


SvqR8bv.jpeg
 
Last edited:

runscott

Lifer
Jun 3, 2020
1,294
2,841
Washington State
That looks great!

Thanks - I have a question for you: The crossed Barling stamp on the stem is visible on the 'before' stem, but largely rubbed off. When I applied some white fingernail polish and then rubbed off the excess, I found that the stamping was actually raised, so I wasn't actually filling in. So I couldn't save it. First time I've ever run across raised stamping on a stem. Haha - not sure that was really a question, but just want to verify that I'm correct about this.
 
  • Like
Reactions: grimpeur

sablebrush52

The Bard Of Barlings
Jun 15, 2013
20,999
50,298
Southern Oregon
jrs457.wixsite.com
Thanks - I have a question for you: The crossed Barling stamp on the stem is visible on the 'before' stem, but largely rubbed off. When I applied some white fingernail polish and then rubbed off the excess, I found that the stamping was actually raised, so I wasn't actually filling in. So I couldn't save it. First time I've ever run across raised stamping on a stem. Haha - not sure that was really a question, but just want to verify that I'm correct about this.
I’ve seen this a few times on buffed stems where the raised edges of the
stamped strike remained a little raised.
 

ssjones

Moderator
Staff member
May 11, 2011
19,041
13,172
Covington, Louisiana
postimg.cc
You don't see many Sterling, Hallmark GBD 9242's. Someone wanted this one bad

Screenshot_20240508_194848_Facebook.jpg
 
Dec 3, 2021
5,555
48,278
Pennsylvania & New York
You don't see many Sterling, Hallmark GBD 9242's. Someone wanted this one bad

View attachment 308779

I was looking at that one and thought about bidding, but it certainly wouldn’t have been that much.
 

greeneyes

Lifer
Jun 5, 2018
2,273
12,633
Can that even be made smokable again?

I know one of the Meerschaum pipe sites sells liners (custom sizing) for briar pipes, so that may be an option for you to look into if other options fall through.
Which site is that? I'd be interested in having a look. Thanks.
 
  • Like
Reactions: Ahi Ka

runscott

Lifer
Jun 3, 2020
1,294
2,841
Washington State
I guess it depends a little on what you mean by smokable. I've got a pipe with a crack in it and it smokes just fine 🙂
It's too bad they didn't show detailed pics of the damaged areas. I have only run into one pipe where I couldn't fix the cracks, but the stummel was in 4-5 pieces and there was a 'key' chunk missing :)

In any case, I would have bought it for that price - not much of a gamble.
 

Ahi Ka

Lurker
Feb 25, 2020
6,844
32,665
Aotearoa (New Zealand)
It's too bad they didn't show detailed pics of the damaged areas. I have only run into one pipe where I couldn't fix the cracks, but the stummel was in 4-5 pieces and there was a 'key' chunk missing :)

In any case, I would have bought it for that price - not much of a gamble.
I requested detailed pics of the damage and was happy with what they sent.

Even if this pipe isn’t returned to smoking condition, I’d happily pay $20 again just to have it on the shelf.
 

jguss

Lifer
Jul 7, 2013
2,686
7,395
Did any of you guys here outbid me? I was quite keen on adding a dugout to the orliks

Someone got a steal. I’m looking at this listing on my phone so I can’t see the hallmarks but assuming the 1920 reading is correct this would be one of the first Dugouts produced. The line was only introduced in October of that year. Despite being offered for decades Dugouts are thin on the ground. I’m lucky to have found one about nine years ago:

1715555676176.jpeg

[photo by Al Jones who was kind enough to clean it up for me; he did a nice write up on the pipe for Steve Laug’s blog: Orlik “Dugout” Restoration - https://rebornpipes.com/2015/03/25/orlik-dugout-restoration/]
 

Ahi Ka

Lurker
Feb 25, 2020
6,844
32,665
Aotearoa (New Zealand)
Someone got a steal. I’m looking at this listing on my phone so I can’t see the hallmarks but assuming the 1920 reading is correct this would be one of the first Dugouts produced. The line was only introduced in October of that year. Despite being offered for decades Dugouts are thin on the ground. I’m lucky to have found one about nine years ago:

View attachment 309820

[photo by Al Jones who was kind enough to clean it up for me; he did a nice write up on the pipe for Steve Laug’s blog: Orlik “Dugout” Restoration - https://rebornpipes.com/2015/03/25/orlik-dugout-restoration/]
Yes I’m well aware they are thin on the ground. I’m happy that someone else grabbed it at a good price….now I just need to figure out a way to arm wrestle you out of your bent one 🤔😂
 

ssjones

Moderator
Staff member
May 11, 2011
19,041
13,172
Covington, Louisiana
postimg.cc
Someone got a steal. I’m looking at this listing on my phone so I can’t see the hallmarks but assuming the 1920 reading is correct this would be one of the first Dugouts produced. The line was only introduced in October of that year. Despite being offered for decades Dugouts are thin on the ground. I’m lucky to have found one about nine years ago:

View attachment 309820

[photo by Al Jones who was kind enough to clean it up for me; he did a nice write up on the pipe for Steve Laug’s blog: Orlik “Dugout” Restoration - https://rebornpipes.com/2015/03/25/orlik-dugout-restoration/]
It was an honor to work on that one! That blast....!
 
  • Like
Reactions: grimpeur and Ahi Ka

ssjones

Moderator
Staff member
May 11, 2011
19,041
13,172
Covington, Louisiana
postimg.cc
A couple of interesting auctions ended/are ending this evening.


1715556710376.png

Unused Loewe, pretty high price for this marque.


1715556687562.png
 

jguss

Lifer
Jul 7, 2013
2,686
7,395
Yes I’m well aware they are thin on the ground. I’m happy that someone else grabbed it at a good price….now I just need to figure out a way to arm wrestle you out of your bent one 🤔😂

I've never been so grateful that almost 15 thousand kilometers separates me from New Zealand.