Black Frigate Horn (Pic Heavy)
- Thread starter saintpeter
- Start date
SmokingPipes.com Updates
Watch for Updates Twice a Week
PipesMagazine Approved Sponsor
Site Sponsors
PipesMagazine Approved Sponsor
PipesMagazine Approved Sponsor
PipesMagazine Approved Sponsor
PipesMagazine Approved Sponsor
- Status
Did I read that right, you are doing this with one arm?
Yikes if I were to make a pipe with one hand it would probably end up looking like one of Bill's Freehands!
Yikes if I were to make a pipe with one hand it would probably end up looking like one of Bill's Freehands!
LOL, well I DO have two hands. Just that one is for show. Brain stem stroke took out my left side. The good news I lived through it without damage to my mind. The bad news was I was originally left handed. Shit happens. As to the pipe it is actually coming along. I learned long ago one can take the wood off easily, but putting it back on is not an option.
Got it roughed out for shape. Now to remove about half the remaining wood. It currently would make an exceptional One Wood for golfing. Hmmmm....... Note to self. Less rum and more tea.
"
Just glad I didnt have gulp of either in my mouth when I read that!!
Oh, Sweet Jesus. Last post for a week. I found the only way to achieve symmetry in sanding is to take a 13 inch by 1/4 inch sanding belt, turn it inside out, put the wood in a vise, loop the belt over it and run it back and forth like buffing a shoe with a shoe shine cloth. I figure a 1/16 inch thickness reduction per day.
Just remember, I am not a "real" pipe maker nor even a talented amateur. I don't even play one on TV. What I am is your standard crazed pipe smoker, like almost every member here, who refuses to believe the can't do something until they prove or disprove it to themselves. (Being in one's second child-hood doesn't hurt either.)
Shaped and starting sanding. Logo inlay done. 6mm steel tube with 8 copper rods/wires and one center brass one. Set at an angle then flushed so it is an oval.
One more pass with rough sanding then on to finer grits and scotchbrite wheels.
(Yeah, the diamond saddle bit got trashed because of an Oops moment.)
(Yeah, the diamond saddle bit got trashed because of an Oops moment.)
A mind is a terrible thing to waste. It was pointed out to me that this is not my first horn. It seems that back in 2012 I knocked out a pipe in a hurry for a friend. He thinks it is a horn, but I don't. Plus due to the lack of effort put into it I do not consider it a serious pipe, though it is still in his rotation.
And a light wash of USMC black for contrast stain. Yes, most of it will be removed exposing the high lighted grain. USMC black differs from regular in that it has a brown undertone as opposed to blue.
Do I understand you are doing this one-handed? I can't imagine it, but my wife is on crutches and does crazy good cooking and baking, so I know adaptations can be made. What a great pipe, good for years of triumphal smoking.
And black removed, oxblood over-stain and a wash of thinned shellac applied and coarsely wiped off. That is just to do a final set on the stain and will be buffed off and carnuba applied.
After getting this far I will finish it. It is a good and solid pipe, but I am not in love with the grain. When done I fear I will consign it to the Drawer Of Lost Causes, never to be seen or smoked.
After getting this far I will finish it. It is a good and solid pipe, but I am not in love with the grain. When done I fear I will consign it to the Drawer Of Lost Causes, never to be seen or smoked.
Cool pipe. I've been daydreaming about trying to make one myself.
Ah, my friend...don't dream it...do it! There is something about smoking a pipe you have labored on - be it a bare block you have drilled yourself, a kit pipe or even restoring an estate pipe that adds much to the enjoyment of both looking at it and smoking it.
+1 on that comment, one of my favorite go to pipes is my first carve from a predrilled block kit. Not professional quality in look, but a fine smoking pipe that I can say I made!
- Status