Hi folks, I have just picked up a new pillar drill (drillpress) for an astonishing price and thought I might try buffing some stummels (not stems as am fearful of damaging them) and need a bit of advice.
I see an outlet here in the UK has buffing wheels of 100mm dia and either 'loose leaf' or 'double stitched' types. Which would be best for this purpose?
Also I believe the optimum speed for buffing is 1750 rpm but my drill offers only 500, 890, 1400, 1900 & 2500 speeds. I assume I should use 890, would that be correct given my options?
Any other tips would be most welcome.
Regards,
Jay.
I see an outlet here in the UK has buffing wheels of 100mm dia and either 'loose leaf' or 'double stitched' types. Which would be best for this purpose?
Also I believe the optimum speed for buffing is 1750 rpm but my drill offers only 500, 890, 1400, 1900 & 2500 speeds. I assume I should use 890, would that be correct given my options?
Any other tips would be most welcome.
Regards,
Jay.