***What Are You Smoking? March 2020***

Log in

SmokingPipes.com Updates

Watch for Updates Twice a Week

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

Drucquers Banner

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

Drucquers Banner

PipesMagazine Approved Sponsor

Status
Not open for further replies.

maulragoth

Part of the Furniture Now
Jan 30, 2018
579
6,079
Just about to finish off this Comoy's #4. Going to pack a bowl of Stokkebye LNF to catch the differences.
Incineration Device: Twain Bent Cob /w blk/whte Swirl Forever Stem.
Fluids: Lagunitas Super Cluser IPA, and glass of water.

Getting a little more tang out of LNF today on first light btw....
 
Last edited:

craig61a

Lifer
Apr 29, 2017
6,162
52,933
Minnesota USA
HU Director’s Cut in a Peterson 9BC. It didn’t have the chimney when I got it. I received two metal chimneys from Peterson a few weeks ago, one to replace the missing one from my 11s Deluxe. Since they included a spare, I figured let’s see if it works in the 9BC. Didn’t fit, just a hair over. The original may not have been threaded, but there did seem to be threads in there. I drilled it out and tapped it, 1/4 20, screwed it in, ready to roll.

29-ED043-A-ECA6-453-E-9-D6-F-689-C6-EDBD096.jpg
 

BROBS

Lifer
Nov 13, 2019
11,765
40,039
IA
HU Director’s Cut in a Peterson 9BC. It didn’t have the chimney when I got it. I received two metal chimneys from Peterson a few weeks ago, one to replace the missing one from my 11s Deluxe. Since they included a spare, I figured let’s see if it works in the 9BC. Didn’t fit, just a hair over. The original may not have been threaded, but there did seem to be threads in there. I drilled it out and tapped it, 1/4 20, screwed it in, ready to roll.

29-ED043-A-ECA6-453-E-9-D6-F-689-C6-EDBD096.jpg
I did the same on a Mark Twain. ;)
 
Status
Not open for further replies.