Today I spent some time waxing 3 pipes. I used a furniture/floor wax made up of Carnauba and distilled pine resin…. gum turpentine along with petroleum distillates. It’s a paste wax that I’ve been using on my shop saw surfaces for decades.
After researching and looking into all of the different ‘pipe’ waxes that once were and currently available I decided to give this wax a go since I already had it on hand.
The application is completely by hand, but I can honestly say being a carnauba based wax a buffing wheel would take the polished sheen up a notch.
The 8s was polished and it’s easy to see the reflective difference from the unpolished 9b.
I also waxed up two Peterson terracotta pipes as well. One a 23’ gloss finish Squire and a satin 21’ deluxe 999. The 999 had terrible stain bleed off when new. It continually stained my hands when smoked. Waxing this pipe gave very satisfying results.
The wax I used has been on the market for quite awhile now. Initially it was Behlen ‘Blue Label’ paste wax. Mohawk has since acquired it and now distributes it. Still labeled Blue Label. I placed a call and the representative claimed it’s the same formula as they bought out Behlen.
Being Carnauba it’s a hard wax and thou it buffs out well by hand, it would definitely shine with a wheel.
I’ll continue to post pics.
![IMG_0433.jpeg IMG_0433.jpeg](https://pipesmagazine.com/forums/data/attachments/282/282051-b7dc5cc872b7c77a00df500018e055e3.jpg)
After researching and looking into all of the different ‘pipe’ waxes that once were and currently available I decided to give this wax a go since I already had it on hand.
The application is completely by hand, but I can honestly say being a carnauba based wax a buffing wheel would take the polished sheen up a notch.
The 8s was polished and it’s easy to see the reflective difference from the unpolished 9b.
I also waxed up two Peterson terracotta pipes as well. One a 23’ gloss finish Squire and a satin 21’ deluxe 999. The 999 had terrible stain bleed off when new. It continually stained my hands when smoked. Waxing this pipe gave very satisfying results.
The wax I used has been on the market for quite awhile now. Initially it was Behlen ‘Blue Label’ paste wax. Mohawk has since acquired it and now distributes it. Still labeled Blue Label. I placed a call and the representative claimed it’s the same formula as they bought out Behlen.
Being Carnauba it’s a hard wax and thou it buffs out well by hand, it would definitely shine with a wheel.
I’ll continue to post pics.
![IMG_0433.jpeg IMG_0433.jpeg](https://pipesmagazine.com/forums/data/attachments/282/282051-b7dc5cc872b7c77a00df500018e055e3.jpg)
Attachments
Last edited by a moderator: