Unconventional Pipe Racks / Displays
- Thread starter mikethompson
- Start date
PipesMagazine Approved Sponsor
Site Sponsors
PipesMagazine Approved Sponsor
PipesMagazine Approved Sponsor
PipesMagazine Approved Sponsor
PipesMagazine Approved Sponsor
I plan on doing something like this but with a large slab of live edge...just haven't found the right piece yet.
My brother put up a tool strip above his work bench in his garage to hold his pipes inverted stem down. While I haven't seen it I believe he said its rubber so probably a rubber tool mount,
There's that steakhouse in New York City that has all the clays in the rafters.
That's interesting - and with some sort of rubber gripper to hold them in place?
Rumour has it that @hoosierpipeguy hires the old pipebabe models to stand in his smoking room and hold his rubios.
That is correct, however, they most often hold more than my Rubios.
I have a glass cabinet from IKEA with some tiered acrylic stands from Amazon and individual stands from aliexpress for my figural meers:
I have to say that your Meer Collection is the most impressive I've seen, bravo bravo!!!!!
This has given me a great idea for a slab or two of timber that I have. Now to find suitable attachment devices for the pipes.
You could contact the guy in Long Island who has MS and see what he has. I can't recall his name off=hand but he makes pipe racks. As you can expect one of his costs a consider able some of money. I wish I could recall his name but for right now I am totally blank.
i found this thread today looking for cheaper alternatives to racking and storing pipes. the little cheap plastic fishing rod clips screwed onto a piece of plywood with some sort of fabric over the wood seemed to be the best option to make a larger pipe holder.
But while Searching for the little round plastic clips I found these. These also look like they can be screwed to a piece of plywood. Or directly onto a wall and would make perfect little pipe holders. They look like they could be used to hold the pipe stem or the pipe shank. And in a vertical or horizontal fashion. There are many different types. From a foam material that just uses a friction fit to squeeze hold the rod or pipe. To spring loaded version that also have soft foam rubber at the squeeze point. Just figured id post this for anyone who might find this useful. Here are some Amazon links. eBay, Etsy, Temu, Ali express also have similar systems.
https://www.googleadservices.com/pa...t-X3aCJAxWBD1kFHXeLIWQQ5bgDKAB6BAgFECM&adurl=
www.googleadservices.com
But while Searching for the little round plastic clips I found these. These also look like they can be screwed to a piece of plywood. Or directly onto a wall and would make perfect little pipe holders. They look like they could be used to hold the pipe stem or the pipe shank. And in a vertical or horizontal fashion. There are many different types. From a foam material that just uses a friction fit to squeeze hold the rod or pipe. To spring loaded version that also have soft foam rubber at the squeeze point. Just figured id post this for anyone who might find this useful. Here are some Amazon links. eBay, Etsy, Temu, Ali express also have similar systems.
https://www.googleadservices.com/pa...t-X3aCJAxWBD1kFHXeLIWQQ5bgDKAB6BAgFECM&adurl=