Repairing lip on pipe stem

[tinbird]

Am I correct in thinking the easiest/low cost way to repair a chipped pipe stem lip is to use epoxy and sand/file to shape?

Do I need to color the epoxy to match the black stem and if so what do you suggest to use to do this?
With over flowing gratitude from the very depths of my heart, soul and complete being
Tb

 

[jpmcwjr]

A photo would help those helping you! IIRC, one uses superglue equivalent, but do wait for an expert to opine.
Here's a way to show a photo embedded in the post.
Once your photos are on a photo hosting site (such as Imgur.com; Photobucket; Postimage; Dropbox, etc.), or on virtually any site, select the full image, then Control-click (Mac) or Right-click (Windows) on the image itself, then choose copy image location. Now paste that URL (the full web address, which should end in .jpg) into the IMG box in the reply window of the thread you're posting to.

 

[fluffie666]

This should be relevant

http://pipesmagazine.com/forums/topic/patch-repairing-vulcanite-stems

 

[tinbird]

Thanks, not too computer savvy but will try and get a photo

Appreciate the link
Tb

 

[mawnansmiff]

I would use the black superglue then once dried very carefully sand it back to shape using high grit paper.
Regards,
Jay.

 

[georged]

If the stem is vulcanite (rubber), you'll get a much longer lasting patch with G-Flex epoxy tinted black.
https://www.amazon.com/NRS-flex-Epoxy-2-4oz/dp/B002IZFPQE/ref=sr_1_1?ie=UTF8&qid=1493394676&sr=8-1&keywords=west+system+g-flex#Ask
https://www.amazon.com/System-Three-3201A04-Pigment-Coating/dp/B003L0XE0E/ref=sr_1_fkmr3_1?ie=UTF8&qid=1493394612&sr=8-1-fkmr3&keywords=west%2Bsystem%2Bepoxy%2Bblack%2Btint&th=1

 

[ashdigger]

I have used the products Georged lists ^^^ and they've improved the repairs I've made exponentially. :clap:

 

[bonanzadriver]

I would also not rule out buying a replacement stem from Vermont Freehand if;
It's not a rare or valuable pipe
A small repair.
For my more expensive pipes, Dunhills and such, I always try to repair the original stem when possible.
If however it's just an average ol estate drugstore pipe, like most of mine, it's often cheaper and quicker to pick up a replacement stem for less than $10 and sand it into shape / fit.
The first time I tried the black superglue I really screwed it up. Ended up sending the pipe off to Briarville and had Ric repace it.
After that I found Vermont Freehand.
I've done this with a couple of my bent bulldogs. Takes time but turns out very nice.