Peterson Waterford?
- Thread starter sparrowhawk
- Start date
SmokingPipes.com Updates
Watch for Updates Twice a Week
PipesMagazine Approved Sponsor
Site Sponsors
PipesMagazine Approved Sponsor
PipesMagazine Approved Sponsor
PipesMagazine Approved Sponsor
PipesMagazine Approved Sponsor
- Status
Mark Irwin has a blog entry describing some of the new lines:
https://petersonpipenotes.wordpress.com/tag/peterson-waterford-pipe/
https://petersonpipenotes.wordpress.com/tag/peterson-waterford-pipe/
I like the finish on that one. I need to grab a Peterson. Does anyone think the quality of the pipes (and, in particular, the drilling) will improve following Laudisi's purchase of Peterson?
Previously I have had two and still have one left,all in all,pretty nice pipes, sometimes with minor flaws such as fills and misaligned stems(the latter mostly applies to bent pipes)
Glad to hear this about Waterford. Had a problem with refinishing an Atlantic and asked Glen if a Waterford would be an adequate substitute, a 106, BTW.
Peck, I own quite a few Petersons and I only disliked one. The finish resembled plastic. I've never had a drilling problem.
I have 70+ Peterson pipes, all smoke great, except one. I've never had a drilling issue. I think rumor and conjecture go along way. Statements like: "Well I heard..." or "well a guy at my pipe club..." or "the forums say..."
Dip stained in the past? Yes. In fact I'm breaking in a 1981 Peterson Supreme 2s (basically the 80's version of the Deluxe) Gorgeous pipe. Flame grain, flawless, no fills....dip stained. It smokes amazing, but I'm pushing through the stain. I think the dip staining ended at some time in the early 2000's, but yet I will still see one pop up. Never a drilling issue though.
It seems like everyone has tons of issues with Peterson pipes, yet tons of people own them and like them. You do the math.
I’ve had drilling issues, fitment issues, and a badly bent stem... and that was all on one pipe. The only new Pete I ever bought, last year’s Christmas pipe. The lovely creamy swirl acrylic stem was bent such that the button was at a 45 degree angle from level if the stem was nested in the shank properly.
Could I fix this? Yes. Did I? Yes. Should I have had to? Nope.
The Rosslare 80S I own? Lovely. A truly marvelllous pipe. But people who speak about QC issues coming out of Peterson aren’t just blowing smoke.
Thanks for the link, Al.
— Pat
Could I fix this? Yes. Did I? Yes. Should I have had to? Nope.
The Rosslare 80S I own? Lovely. A truly marvelllous pipe. But people who speak about QC issues coming out of Peterson aren’t just blowing smoke.
Thanks for the link, Al.
— Pat
Thanks Pat. That's why I asked. I had one relatively new Peterson a few years back when I enterred the hobby. It was a straight pipe and couldn't pass a pipe cleaner without contorting the cleaner numerous times. I gave the pipe away. It takes a ton of skill to make a straight pipe that won't pass a pipe cleaner. That's why I asked my question. Love the company and the history and would love to have another. Hope QC improves.
Was it a p-lip or regular? I've always found p-lips to be very tricky, whether straight or, God forbid, bent.
Have 6-8 Petes, none with a smoking problem (including drilling, passing pipe cleaner). One has so many fills it looks like it should have been sandblasted. It is in the Aran line.
I visited the store in Dublin two years ago and picked out two very decent black blasts for under $150 the pair. One bent, one billiard. There were, however, a fair number of the 50 pipes I handled that had off center drilling into the stummel.
I visited the store in Dublin two years ago and picked out two very decent black blasts for under $150 the pair. One bent, one billiard. There were, however, a fair number of the 50 pipes I handled that had off center drilling into the stummel.
I assume the pipe I got was made on Friday after a typical Irish lunch. How do I request a pipe made on a Monday?
One thing I like to say about all my Petersons in the past and now,they all and each had(have) pretty descent draw being not too open nor narrow,just now am smoking My Rosslare Royal Irish shape 05 which I find very nice pipe,(one minor fill and thats was all faults I could found in it)only one downside is that it's a bit heavy when compared to my French make pipes or Stanwells.
When they're all hungover??
(At least that's the "wisdom" often spouted about buying an American made auto: No Monday or Friday made vehicles.)Just call Aer Lingus and book a flight to Dublin.....
- Status