Pear Wood, Is lighter weight.

Log in

SmokingPipes.com Updates

6 Fresh Castello Pipes
4 Fresh Henri Sorensen Pipes
9 Fresh Bruno Nuttens Pipes
36 Fresh Savinelli Pipes
3 Fresh Becker Pipes

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

Drucquers Banner
Status
Not open for further replies.

aeropuffer

Starting to Get Obsessed
Mar 7, 2016
105
1
I don't like having a lot of weight hanging in my mouth. It feels like it's trying to pull my teeth out. Pear wood is less dense. Therefore, it has greater insulative ability to keep the pipe cool to the touch. It being less dense makes it less expensive to manufacture. Thereby keeping the cost of the finished pipe at a more modest outlay to the final buyer. For me pear wood would be one of the best woods for pipes.

 

jazz

Part of the Furniture Now
Feb 17, 2014
813
65
UK
Hmm, I am perhaps a little unsure as to what you are getting at. You do know you can buy pear wood pipes, right?

 

markus

Part of the Furniture Now
Mar 18, 2014
770
475
Bloomfield, IN
I have a pear wood pipe (MR. Brog Amigo) and it smokes pretty good except it tends to smoke a little hotter than my briar's. I sometimes smoke a little hot anyway if I'm doing something or distracted while smoking and I have to be more careful while smoking that pipe and really pay attention to my cadence, or it feels like it will burn up.

 

mso489

Lifer
Feb 21, 2013
41,211
59,147
Mountain Laurel is lighter than briar and smokes fairly cool. The only trouble is that it is not widely available. I think only part of the tree/shrub is safe, so it may not be good to harvest it yourself. During WWII, it was used as a briar substitute in the U.S.
I think Mr. Brog pipes come in both pear and briar, and maybe other woods. People seem to be fairly happy with his pear wood pipes, and some prefer them.
I like my Mountain Laurel pipes both for their good smoking characteristics and their relative scarcity. The carver who made mine doesn't sell online. You can only buy from him at the TAPS pipe show coming up April 9 in Raleigh, N.C. (if he is there this year... I don't know that), or at the N.C. State Fair in October. I think only a limited number of his pipes are Mountain Laurel, most are briar.

 

mawnansmiff

Lifer
Oct 14, 2015
7,901
8,929
Sunny Cornwall, UK.
"It being less dense makes it less expensive to manufacture."
Aeropuffer, how on earth do you reach that conclusion? I would wager the reason pearwood pipes are cheaper is because pearwood grows pretty much everywhere as opposed to (quality) briar.
In my (limited) experience of smoking pearwood I would also say that the pipe burns considerably hotter than briar.
Regards,
Jay.

 

jpmcwjr

Lifer
May 12, 2015
26,265
29,180
Carmel Valley, CA
Density of wood has virtually no bearing on cost to manufacture, but the rub, as Jay points out, lies in it's being cheaper to acquire as it's more available (and less desirable).
Density alone does not determine heat transfer. My one pear wood smokes very hot, but also has a thinnish wall. I don't smoke that one pipe.

 

hawky454

Lifer
Feb 11, 2016
5,345
10,189
Austin, TX
I have had a pear wood pipe and I gifted one to my brother. His burnt out pretty quick and I prefer briar by a long shot.

 

tmb152

Can't Leave
Apr 26, 2016
392
5
I have not bought a pearwood pipe but if it is lighter and less dense as you say, then that would be a disadvantage, and will not only burn hotter in your hand but will not last as long.

 

velotrain

Might Stick Around
Jun 12, 2016
50
1
Sounds like what's needed is a pear wood super volcano, or a pear wood pipe with heat sink cooling fins, sort of like the Porsche pipe.
Here's an oddity I found, although will admit it's rather ugly:
pipe-with-heat-sinks-similar-to-my-idea-but-ugly.jpg


 

velotrain

Might Stick Around
Jun 12, 2016
50
1
Jay - since it looks like a reverse calabash, you would think it wouldn't need the additional cooling.

I wouldn't say it's a work of art, but the more I look at it the more I'm getting used to it, and find myself curious about what it would be like to hold it.
Here's another pipe I found with cooling fins.
Somewhat better looking, but I suspect it has a rather strange hand feel.
idea-i-could-modify-a-pipe-to-this.jpg


 

crashthegrey

Lifer
Dec 18, 2015
4,051
4,683
42
Cobleskill, NY
www.greywoodie.com
I'd agree with all the above that pearwood smokes hot, but Mr. Brog makes some quality pearwood pipes if you are interested in one. If pipes feel too heavy, I'd also consider looking for a shorter pipe with a smaller bowl, maybe a very slight bend. A well made pipe that suits you can disperse the weight better. Look around, buy a few more pipes, play with ideas, commission a pipe from a good carver, they will help you 'fit' your pipe right.

 

mawnansmiff

Lifer
Oct 14, 2015
7,901
8,929
Sunny Cornwall, UK.
Hextor, I would very much doubt it unless one smoked so hard as to scorch or burn the bowl. If one is looking for a cheap though perfectly good pipe I would suggest buying a few estate pipes from Ebay and restoring them. It really is not as difficult as it sounds and is actually very relaxing.
Also one can get lucky and get a pipe from a manufacturer who is known for producing quality pipes. I know this to be true as it has happened to me many times. I have even bought recently a Dunhill 'Cumberland' straight billiard for a mere £6 (~$9) or so. About 4 hours work on that pipe was the only other 'cost' to me. Smoked it for the first time tonight and it's great.
Regards,
Jay.

 
Status
Not open for further replies.