Explodingpenguin wrote me with some questions about the joint connector on
this Pipe. It seems a good idea to share the information...
What you have is a faux military mount. The bit engages
the mortise like a military mount. The mortise, which is
really a shank extension of acrylic, is connected to the
Pipe’s shank with a derlin push/pull, which should be removed
from the shank with a twisting clockwise motion, that will allow
the mortise to remain in the shank. For cleaning, it is best to
disassemble this setup. I have one like it in a couple of my Yanik Meerschaums.