Almost finished now... it just needs a layer of carnaubawax and a little bit of polish for the mouthpiece.
![20231003_154059 kopie.jpg 20231003_154059 kopie.jpg](https://pipesmagazine.com/forums/data/attachments/250/250815-5ecd033d2f26bd098ce90da19cb1e24d.jpg)
The first pipe I made has a Butz-Choquin mouthpiece.
![20230420_152954.jpg 20230420_152954.jpg](https://pipesmagazine.com/forums/data/attachments/250/250826-6f03bc6810e74833cf75039c6d25d970.jpg)
But this 2nd pipe is all handmade. From one nice large block of Greek Briar wood and a piece of vulcanite that I got from a very friendly Dutch pipesmoker.
I had this tiny 'Charatan's make deLuxe 56' chimney pipe and wanted something similar but bigger. Hard to find so I started making one myself. Except for a drill and the buffing, no electronic tools were used. Really handmade...
![20231003_154823 kopie 2.jpg 20231003_154823 kopie 2.jpg](https://pipesmagazine.com/forums/data/attachments/250/250817-ab1c0f2be51ab60ab6232e6bb754cb43.jpg)
This is the result so far. 74mm high and 16cm in length.
![20231003_154140.jpg 20231003_154140.jpg](https://pipesmagazine.com/forums/data/attachments/250/250820-5d1028242b18ad0591deb60fc09f1b21.jpg)
![20231003_154628 kopie.jpg 20231003_154628 kopie.jpg](https://pipesmagazine.com/forums/data/attachments/250/250822-20406ebbe0ada07b4e15d65c9f1ec781.jpg)
![20231003_154059 kopie.jpg 20231003_154059 kopie.jpg](https://pipesmagazine.com/forums/data/attachments/250/250815-5ecd033d2f26bd098ce90da19cb1e24d.jpg)
The first pipe I made has a Butz-Choquin mouthpiece.
![20230420_152954.jpg 20230420_152954.jpg](https://pipesmagazine.com/forums/data/attachments/250/250826-6f03bc6810e74833cf75039c6d25d970.jpg)
But this 2nd pipe is all handmade. From one nice large block of Greek Briar wood and a piece of vulcanite that I got from a very friendly Dutch pipesmoker.
I had this tiny 'Charatan's make deLuxe 56' chimney pipe and wanted something similar but bigger. Hard to find so I started making one myself. Except for a drill and the buffing, no electronic tools were used. Really handmade...
![20231003_154823 kopie 2.jpg 20231003_154823 kopie 2.jpg](https://pipesmagazine.com/forums/data/attachments/250/250817-ab1c0f2be51ab60ab6232e6bb754cb43.jpg)
This is the result so far. 74mm high and 16cm in length.
![20231003_154140.jpg 20231003_154140.jpg](https://pipesmagazine.com/forums/data/attachments/250/250820-5d1028242b18ad0591deb60fc09f1b21.jpg)
![20231003_154628 kopie.jpg 20231003_154628 kopie.jpg](https://pipesmagazine.com/forums/data/attachments/250/250822-20406ebbe0ada07b4e15d65c9f1ec781.jpg)