Is There A Real Difference.

Log in

SmokingPipes.com Updates

Watch for Updates Twice a Week

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

Drucquers Banner

PipesMagazine Approved Sponsor

PApiper63

Might Stick Around
Apr 13, 2024
63
291
Hello fellow pipers. I own about 70 pipes including several artisan pipes and several factory pipes. I do notice a difference in the finish quality, the stem work, etc..
However, in general, I have to say that I don't notice a lot of difference in the smoking qualities. Both groups have some that smoke better than others, but in general, I really don't notice a difference in the quality of smoke between factory pipes and artisan pipes. Am I crazy? Do you guys notice a big difference?
 

sablebrush52

The Bard Of Barlings
Jun 15, 2013
20,726
49,105
Southern Oregon
jrs457.wixsite.com
Hello fellow pipers. I own about 70 pipes including several artisan pipes and several factory pipes. I do notice a difference in the finish quality, the stem work, etc..
However, in general, I have to say that I don't notice a lot of difference in the smoking qualities. Both groups have some that smoke better than others, but in general, I really don't notice a difference in the quality of smoke between factory pipes and artisan pipes. Am I crazy? Do you guys notice a big difference?
I haven’t found much of a difference, with the following exceptions:
Wide bored contemporary artisan pipes vs traditional narrower bore pipes. Not that one is better, just a little different to use.
Some blends work better for me in large chambers
The extra money spent on a comfortable bite zone.
Other than this, differences are minor.
Pipe smoking breaks down to 25% equipment and 75% technique.
 

Pipke

Can't Leave
Aug 3, 2024
339
982
East of Cleveland, Ohio. USA
Greg Pease wrote an essay on this topic. Maybe this will help:
G. L. Pease Articles - Are High Prices Justifiable? - https://www.glpease.com/Articles/Price.html

I have a few fine smokers that I obtained either for free, or for less than $100. I define "fine" to be (as long as I do my part) a tendency to stay lit, the draw is good, stays fairly cool during the smoke, and they don't develop constant gurgles. They consistently deliver an enjoyable pipe smoking experience. In my opinion, any estate pipe in good condition, from a manufacturer with an excellent reputation, is capable of being a fine smoker. My preference has been for older Sasieni, GBD, Stanwell, and cheap, vintage French pipes.

I will pay more for pipes that are a delight to the eye and give me that extra joy from smoking out of a nice looking pipe. I own very few of these. I just obtained a 2024 Neerup Harvest Moon - it is a very fine smoker and fun to smoke. But even this pipe is not a "high end" pipe.
 

bullet08

Lifer
Nov 26, 2018
10,229
41,507
RTP, NC. USA
It's how they are drilled that makes the biggest difference. Wide open kind, and narrow ones. And how well they are drilled. But with reputable factory and well made artisan pipes, they will smoke without noticing much difference since they are all made well. You would still noice wider bores.
 

PApiper63

Might Stick Around
Apr 13, 2024
63
291
Can you list what factory pipes and what artisans? Pictures would help also.

So, did you just buy 70 pipes over the weekend and come to this discovery? Or, has this been a slow long contemplative discovery that just peaked today?
Sorry, confusing I did collect quite a while and just slowly coming to the realization
 

telescopes

Pipe Dreamer and Star Gazer
Sorry, confusing I did collect quite a while and just slowly coming to the realization
Many people associate quality with price as a measure of causation. It is actually more of a correlation, and with pipes, often a weak one. Back in the 80s I acquired my first Dunhill. I expected fireworks. Nope. It smoked no differently than my cheapest basket pipe. I was in my 20s and I recall being confused. How could that be? Now, when I buy an expensive pipe, it is for fit, finish, attention to details, and styling. To that end, there is causation due to labor and skill set cost. The pipe, if drilled correctly, will most likely provide a more even smoke experience. But a cheap Grabow or basket pipe can and often does pull the same thing off. For those who equate quality with money spent, this can be frustrating.
 

GardenStateoftheArtBriar

Starting to Get Obsessed
Jul 29, 2024
123
160
New Jersey
if its any consolation I bought an 'artisan pipe' made by a very spectacular regional carver at ebay unsmoked from the town he came from( i think) for about $7.99 plus shipping
this pipe smokes beautifully and I'd easily had paid $250 for it had I was to know the quality it would have delivered
meaning - it's kind of luck of the draw sometimes
 

Chasing Embers

Captain of the Black Frigate
Nov 12, 2014
44,986
117,687
Hello fellow pipers. I own about 70 pipes including several artisan pipes and several factory pipes. I do notice a difference in the finish quality, the stem work, etc..
However, in general, I have to say that I don't notice a lot of difference in the smoking qualities. Both groups have some that smoke better than others, but in general, I really don't notice a difference in the quality of smoke between factory pipes and artisan pipes. Am I crazy? Do you guys notice a big difference?
I haven't either. For all of the pretty finishes and accents, all you're really buying is an airway.

images-33.jpeg
 

PipeIT

Lifer
Nov 14, 2020
5,149
30,486
Hawaii
@PApiper63 this is a good article if you haven’t read it before.

The Myth of Brand and Maker in Pipesmoking
By Dr. Fred Hanna, Ph.D


An article on Dr. Hanna…


P.S. Price doesn’t always equate to a better smoker….
 
  • Like
Reactions: KruegerFlap

Snook

Starting to Get Obsessed
Oct 2, 2019
280
870
32
Idaho
I have straights, bents, Dublins, Apples, and a Tomato as well. The only differences I've noticed are:
  • I can actually shove a pipe cleaner all the way through to the bowl on a straight
  • The more bent a pipe is, the more prone it seems to be to condensation
  • Length of smoke depending on the bowl size
That's about it. Of course, I prefer a few of my pipes over the others because of the shape/size/weight. They just feel better to hold, and therefore make my smoke more enjoyable.
 

PaulRVA

Lifer
May 29, 2023
4,752
79,754
“Tobacco Row” Richmond Virginia USA
It all depends on the pipe!
I have pipes both factory and artisan and some are great and others are terrible. Artisans give me fit, finish, sex appeal and the ability
to have things finished to my own specifications or requests if commissioned. Factory pipes give me consistency across the board and several flagship models to choose from by multiple brands.
That being said my experience has been it all depends on the particular pipe. Exact factory models can behave differently, one smokes fantastic and the other is garbage from the beginning.
In the end I’ve learned regardless of the maker, style, shape, size, finish draft or what you want that pipe to be the Pipe ends up choosing you and not the other way around.
Maybe I’m just crazy 🤪