Frustrated!

Log in

SmokingPipes.com Updates

Watch for Updates Twice a Week

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

Streeper541

Lifer
Jun 16, 2021
3,175
20,149
44
Spencer, OH
If Pastor Charlie is anything like this pastor, the pipe will go out while he's chatting or paying attention to something else. puffy

Anyhow, what has been repeated as nasuem already is the best advice. Dry out the CH and pack it looser. Also, make sure your airway is clear.

@PastorCharlie what sort of pipe are you smoking? How long have you been smoking a pipe? What does your routine look like?
 
  • Like
Reactions: JOHN72 and kcghost

Jun 29, 2023
22
34
55
West Virginia
You guys are great! Wonderfully patient and thorough advice. Thank you all so much. One of the things that has me confused is how to properly use the tamper. How do you use the tamper without actually “tamping” the tobacco down? That must be a fine line.
 

blackpowderpiper

Part of the Furniture Now
Dec 19, 2018
830
3,865
Middle Tennessee
You guys are great! Wonderfully patient and thorough advice. Thank you all so much. One of the things that has me confused is how to properly use the tamper. How do you use the tamper without actually “tamping” the tobacco down? That must be a fine line.
The tamper is to primarily tamp down the ash layer as the bowl burns down. Very little pressure is needed, usually just the weight of the tamper itself will do. Occasionally, if you pack too lightly, you can tighten the pack just a bit with the tamper to slightly increase resistance. But go sparingly, it's easy to over tamp and ruin the bowl.
 
  • Like
Reactions: jdb67 and minerLuke

jaingorenard

Part of the Furniture Now
Apr 11, 2022
735
3,345
Norwich, UK
You guys are great! Wonderfully patient and thorough advice. Thank you all so much. One of the things that has me confused is how to properly use the tamper. How do you use the tamper without actually “tamping” the tobacco down? That must be a fine line.
Two reasons: in theory, to compact the ash and protect the ember. Also, if it's loosely packed, to move the ember closer to the unburned tobacco. I have smoked entire bowls without tamping though, particularly if it's quite tight packed shag. You don't want to tamp too hard, and this can be achieved by just using the weight of the tamper itself without pushing, or using your finger to gently press the ashes down. It's usually essential to tamp well after the charring light to press the burnt tobacco down after it lifts up with the heat.

Edit: I just saw blackpowderpiper has said the same above, apologies for repeating!
 

bluegrassbrian

Your Mom's Favorite Pipe Smoker
Aug 27, 2016
6,625
63,627
41
Louisville
You guys are great! Wonderfully patient and thorough advice. Thank you all so much. One of the things that has me confused is how to properly use the tamper. How do you use the tamper without actually “tamping” the tobacco down? That must be a fine line.
Someone said, and it stuck with me, tamp with the weight of a dime.
 
  • Like
Reactions: minerLuke

bullet08

Lifer
Nov 26, 2018
10,182
41,401
RTP, NC. USA
Carter Hall and majority of OTC codger blends don't need drying. You can dry them if you want, but they won't dry too much due to whatever that thing is called that keeps tobacco moist.

Trick here is packing. Codger scoop works very well. As long as you are not too greedy with tobacco, it will leave good size air pocket at the bottom. Gravity fill also works well.
 

mso489

Lifer
Feb 21, 2013
41,210
60,610
It also helps to not give a damn (pardon me pastor) about relights. If you feel irked and humiliated every time you relight, it seems endless.

I love it when an ember just keeps going and I can totally immerse in the flavor and experience of pipe smoking.

Other times, I rack up the burnt matches like cord wood, but I've learned not to care. Just keep on and go for the enjoyment. Don't worry about relights or dottle (unburnt tobacco at the end of the smoke).

Some cuts and blends nearly always burn evenly and well without many relights, and others are a chore. I just go with the flow.

For real problem cuts/blends, I hand grate the leaf and that seems to resolve the problem.
 
  • Love
Reactions: sparker69
Dry, pack loose, tamp often.

I was packing too tight at the beginning trying to follow all the BS - cough - methods (Frank, three step, blah blah blah). Now I dry a bit if needed, gravity feed, rap to settle, feed more, repeat till full then a light press and 🔥. I keep a lighter handy and relight as needed and don't worry anymore. Sometimes I relight a bunch during a bowl other times it may only be once or twice. I almost never finish a bowl on one light.
 

Wet Dottle

Starting to Get Obsessed
Mar 20, 2023
218
1,058
Littleton, CO
You'll hear completely different views on this from different people, and there's no substitute for practice. However, here's my advice. Drying will help, but with practice you can easily smoke tobacco that is more moist than people think, and some tobaccos really benefit from keeping some moisture. With packing you CAN pack too loose, but you are far more likely to be packing too tightly. Most of the 'packing methods' don't work, often pack too tight, and you'll be much better for just putting tobacco in the pipe and gradually getting a feel for it. Tamping helps keep the ember on the tobacco below, but use your finger. The heat means you will struggle to over-tamp, and again it will give you more of a feel for it.

The problem is, different cuts, moisture levels, and types of leaf will all burn differently, and produce different amounts of smoke, needing slightly different packing and (maybe) cadence - again, there's no substitute for just doing it for years. We also all have to relight sometimes, don't worry about it!

The single most important piece of advice - don't puff hard and fast! You can smoke a pipe barely drawing on it at all, and it will stay lit far longer. Barely moving the muscles in your throat and mouth will draw smoke out of the pipe, you really don't need to 'puff' at all.
Listen to this man. He knows.
 

jwussow

Starting to Get Obsessed
Apr 7, 2021
285
4,792
Pewaukee, Wisconsin
I don’t see this brought up on this forum very often, but I have great success with a stubborn blend by removing some of the ash with my pipe tool. I then make sure the tobacco is uniform again, and the relight is typically excellent.
 
  • Like
Reactions: Mortamyhr