I have a small DMT stick file to true the edge of knives as I use them and a set of stones for redoing edge geometry if the knife gets super dull or the edge gets nicked/damaged.
Favored Techniques for Pocket Knife Sharpening?
- Thread starter HawkeyeLinus
- Start date
PipesMagazine Approved Sponsor
Site Sponsors
PipesMagazine Approved Sponsor
PipesMagazine Approved Sponsor
PipesMagazine Approved Sponsor
You can get a dang sharp edge real fast with a mill file and an old leather belt.
Certainly for axes.
The fine stone and buffing to a mirror polish are just indulgent.
agreed. I used to use these cheap diamond rod pens, but they’d wear out so fast. The files last longer and get edges sharp enough for use.
The fine stone and buffing to a mirror polish are just indulgent.
I grew up using dry whetstones, and I got pretty good with them. A few years ago, I went down the rabbit hole researching knife sharpening, and I bought an Edge Pro Apex 4, which uses waterstones. It’s a chunk of change, but my blades are RIDICULOUSLY sharp after a session with it. The polishing tape is a game changer. I had always thought a razor edge was the goal, but now it’s just a rung on the sharpness ladder. It hurt spending the money initially, but I’ve never looked back. FWIW
Interesting thread. When I was a cub scout, I learned to sharpen a pocket knife on a small stone with a thin coating of household oil, moving the blade against the stone with the blade edge facing me. Lately, I located a somewhat larger stone and have watched a few youTube videos. From this, I surmise I can use either water or oil on a stone, but some liquid is required to keep the stone from getting clogged with metal grit. The video I watched had the blade edge pushed away from you with pressure and drawn back toward you with no pressure. The burr is chased back and forth on either side of the blade, between the coarse side of the stone and the finer side, and stropped if you have that. I'll start with some old folding knives until i trust myself with better ones.
Two things that go great together. Knife sharpening and pipe smoking. I like doing them at the same time. Ultimate relaxation.
I had a friend that I worked with in the railroad that was big into knives. We brought a train down to Chicago late one night, and he showed me the proper ways to sharpen a knife. I had no idea that there was so much involved, yet it was so simple.
Changed my perspective on knife sharpening forever.
I had a friend that I worked with in the railroad that was big into knives. We brought a train down to Chicago late one night, and he showed me the proper ways to sharpen a knife. I had no idea that there was so much involved, yet it was so simple.
Changed my perspective on knife sharpening forever.
Finding an old hand cranked grinding wheel is like finding a treasure.
Prairie made them up until a few decades ago.
I should have bought one then.
Prairie made them up until a few decades ago.
I should have bought one then.
Nope...There are water stones and oil stones. Two different creatures. They wear out faster but my preference is for water stones just because they're not as messy and sticky.
I think maybe we should be drawing a distinction between sharpening and honing.
Honing is making an already sharp edge smoother on a close to microscopic scale. Some would call the result a mirror finish. If you look at a blade after 1000 grit, it will not reflect light very well. After 4000 grit, you'll get a bright reflection, after stropping on leather with a green or white compound, you can use it as a mirror. Honing, for all intents and purposes does not remove metal, so if your edge isn't sharp to begin with, it's pretty well a useless exercise.
Sharpening is getting your blade edge to a point if you look at the cross section. How sharp a blade is depends on how close you've gotten to a point. Think of a V shape compared to a U shape to simplify things. The closer you get to a V, the sharper the blade will be. The downside is that the point of the V is microscopically thin and as it's used goes toward the U shape. It needs to be brought back to a point.....HONING
Obviously, if you let your blade go too far to the U shape, you'll have to visibly remove metal to get back to a V shape. The moral of the story...Don't let your blade go completely dull
Nope...There are water stones and oil stones. Two different creatures. They wear out faster but my preference is for water stones just because they're not as messy and sticky.
I think maybe we should be drawing a distinction between sharpening and honing.
Honing is making an already sharp edge smoother on a close to microscopic scale. Some would call the result a mirror finish. If you look at a blade after 1000 grit, it will not reflect light very well. After 4000 grit, you'll get a bright reflection, after stropping on leather with a green or white compound, you can use it as a mirror. Honing, for all intents and purposes does not remove metal, so if your edge isn't sharp to begin with, it's pretty well a useless exercise.
Sharpening is getting your blade edge to a point if you look at the cross section. How sharp a blade is depends on how close you've gotten to a point. Think of a V shape compared to a U shape to simplify things. The closer you get to a V, the sharper the blade will be. The downside is that the point of the V is microscopically thin and as it's used goes toward the U shape. It needs to be brought back to a point.....HONING
Obviously, if you let your blade go too far to the U shape, you'll have to visibly remove metal to get back to a V shape. The moral of the story...Don't let your blade go completely dull
Yep.
80% of the time I do some sharpening for other people, all it really needs is a good straightening.
I have a bunch of these all over the house. Fit nicely in a pocket, have a groove for fish hooks, back side is fine stone material.
I use a spine leading process using a yellow Coticule stone.
Does Bagram on that hand sharpener refer to the airbase in Afghanistan, or is that just a coincidental brand name? I have a more basic version of that, not that brand, that seems to work okay. I'm trying to up my game without causing any permanent damage to my pocket knives. I carry a pocket knife daily for many small tasks, and hate it when the knives aren't reasonably sharp.
I draw the blade at a 20 degree angle on a 1000 grit diamond stone, working away from the edge never towards it, after that the blade is like a very fine toothed saw, and I do know no buffing or any othertreatment.
the amount of work necessary obviously depends on the bluntness of the blade beforehand, this works very well and the edge lasts a long time.
the amount of work necessary obviously depends on the bluntness of the blade beforehand, this works very well and the edge lasts a long time.
I actually just bought a new sharpener for my pocket knives, it hasn’t arrived yet, should be here later today but it’s got great reviews/ratings. I also just bought another Kershaw knife, I love Kershaw.
Work Sharp Guided Field Sharpener, Gray https://www.amazon.com/dp/B009YKHZ96/ref=cm_sw_r_cp_api_i_Q75HAM9J3J8XJ3W8G4SV
Kershaw Fringe Pocket Knife, 3-inch 8Cr13MoV Steel Blade with Gray Titanium Carbo-Nitride Coating, Carbon-Fiber Insert; SpeedSafe Assisted Opening, 8310 https://www.amazon.com/dp/B07BHTRNDM/ref=cm_sw_r_cp_api_i_EWWS6P8TREEWEHYEPJ0E
Work Sharp Guided Field Sharpener, Gray https://www.amazon.com/dp/B009YKHZ96/ref=cm_sw_r_cp_api_i_Q75HAM9J3J8XJ3W8G4SV
Kershaw Fringe Pocket Knife, 3-inch 8Cr13MoV Steel Blade with Gray Titanium Carbo-Nitride Coating, Carbon-Fiber Insert; SpeedSafe Assisted Opening, 8310 https://www.amazon.com/dp/B07BHTRNDM/ref=cm_sw_r_cp_api_i_EWWS6P8TREEWEHYEPJ0E
They are made by Redi Edge. Yes sir, the Bagram is the air base in Afghanistan. Bought a bunch of em from the PX when I was there 2014-2015 for $10 on sale each.
I use a whetstone (I think someone referred to them as a bench stone or sharpening stone earlier). My dad used these for his woodworking tools and showed me how to sharpen knife blades and chisels before I was a teenager (guess it meant I was useful for something in the workshop).
Whetstone and jeweler's rouge on leather, scrap or even my belt.
There are better methods but the question of "favored methods" to me meant: "What do you actually do most of the time?". I've learned a number of "right ways" to sharpen. Most of them are good.
I treat chisels and planes differently than my pocket knife, or axe, or straight razor. For a pocket knife, anything goes.
For 'good enough', if I hadn't previously been obsessed with sharpening: I've never had sharpness from portable hand-held knife sharpeners that I can get with a couple of light strokes from a file.
If I were to start from scratch right now, amazon has diamond sharpening plate sets for previously unheard-of prices: Like $20 for 4 plates: 400, 600, 1000, 1200 grit. Just a few years ago it was $100 per plate.
I treat chisels and planes differently than my pocket knife, or axe, or straight razor. For a pocket knife, anything goes.
For 'good enough', if I hadn't previously been obsessed with sharpening: I've never had sharpness from portable hand-held knife sharpeners that I can get with a couple of light strokes from a file.
If I were to start from scratch right now, amazon has diamond sharpening plate sets for previously unheard-of prices: Like $20 for 4 plates: 400, 600, 1000, 1200 grit. Just a few years ago it was $100 per plate.
Last edited:
Same here. Also what Dad and Granddad used. Just a little stone with the middle worn down.
My sharpest pocket type is a #8 Opinel and a number 1 Mora. These are camp and kitchen knives more or less. The Mora is nice for slicing limes.