Could a Peterson Stem fit a Savinelli 1611 Dry System Pipe?

[Theo.ry]

Title edited for caps and brevity.

I have a savinelli dry system 1611 pipe which I find is a good size bowl. I like everything about pipe except for the stem. Mainly the shape of the stem and the size of the bit.
I am thinking of replacing it with a Peterson standard replacement stem but I am wondering if the stem would fit

 

[tobakenist]

Peterson Stems come in many sizes so you would have to be very lucky for it to fit.

 

[Pipeoff]

I like the Sav dry system stem a lot better easier to clench with nice wider button. If you are bent on the conversion then make sure the tenon will take the balsa filter unless you want to eliminate same.

 

[RustiePyles CPG]

You can just have a new stem made for the SAV to the specifications that you want.

 

[PaulTheScandinavian]

Do newer Petersons come with pre carbonized or coated chambers? And if so, are the booze & kitchen towel enough to get rid of it?

 

[RustiePyles CPG]

Do newer Petersons come with pre carbonized or coated chambers? And if so, are the booze & kitchen towel enough to get rid of it?

Coated not pre-carbonized. And yes, spirits and a paper towel will get rid of it.

 

[Hillcrest]

I am wondering if the stem would fit

I would suggest sending an email to Smokingpipes.com and asking them the circumference of the replacement stem. The measure the circumference of the Sav stem to compare before buying.
I know my Savinelli 2614KS dry stem fits in my Peterson Xl339S and my Erica 302 but I do not believe the reverse is true. Good Luck.

 

[Theo.ry]

You can just have a new stem made for the SAV to the specifications that you want.

Who would I reach out to for a custom stem ?

 

[AJL67]

Who would I reach out to for a custom stem ?

You could reach out to me, but that wouldn't do you any good because i dont know puck-all about making pipes or stems, I can barely polish my own pipes.

 

[Hillcrest]

Who would I reach out to for a custom stem ?

The guy your asking is one of the best.

 

[Theo.ry]

You could reach out to me, but that wouldn't do you any good because i dont know puck-all about making pipes or stems, I can barely polish my own pipes.

Hahah.

 

[RustiePyles CPG]

Who would I reach out to for a custom stem ?

PM me.