My First Deep Cleaning (Pictures)

Log in

SmokingPipes.com Updates

New Cigars




PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

Status
Not open for further replies.

smokeytay33

Starting to Get Obsessed
Aug 29, 2013
202
0
Hey, all!
Here are some pictures of my first pipe cleaning. I removed the black gunk of the rim, sanded down the cake to my liking, currently cleaning the bowl with Vodka and cotton method, and de-oxidized and polished the stem. I want to thank all who have commented on my threads and have given me advice, as well as those who have posted their own threads with advice. I have learned a lot, and there is a long way to go, I'm sure!
Before:

1234458_10151632879075563_378829465_n.jpg


530453_10151719811120563_435563645_n.jpg
1473029_10151719811170563_749832789_n.jpg


1476595_10151719811220563_2121408907_n.jpg

After:

1460179_10151719810900563_1886792329_n.jpg


1476468_10151719810940563_741187775_n.jpg


602053_10151719811045563_175031634_n.jpg

Smokey :puffy:

 

bryanf

Part of the Furniture Now
Jul 16, 2013
742
8
It's funny but tonight I decided to do what I consider a deep cleaning on my pipe, and it still looks 10 times dirtier than your "before" picture! I'm to embarrassed to post pics! Good job!

 

jah76

Lifer
Jun 27, 2012
1,611
35
Nice smokey!
Just a tip that works for me. I like to take a match and "flame" the inner bowl after I clean it. This gets rid of any fuzzies and a bit of the alcohol taste, then wipe it out with a rag. Don't be surprised if you can taste the alcohol for a smoke or two. Give it a day or two to dry after you smoke it also. That wood grain gets puffy when wet IMO.
I like that big ole bowl.

 

smokeytay33

Starting to Get Obsessed
Aug 29, 2013
202
0
petes03, a HUGE thank you goes out to you! In my other thread, General Pipe Maintenance, you posted step by step directions on how to clean the bowl and stem. I had the post next to me as I cleaned. I'm very pleased with the results so far. I think the stem looks way better than it did before. You are awesome! :worship:

 

smokeytay33

Starting to Get Obsessed
Aug 29, 2013
202
0
kashmir, I am trying to get all my pipes to the point of being able to stay clean as I go. I have never owned a new pipe so they all need a deep cleaning. I'll try the obsidian oil! is it expensive? can I leave it on the stem?
Thanks to everyone for the kind comments. This is my first "deep" cleaning, meaning I used more than a pipe cleaner. More input is appreciated. I used whatever I had in the house and suggestions from other smokers on how to clean.

 

kashmir

Lifer
May 17, 2011
2,712
64
Northern New Jersey
Obsidian Oil is around $8 a bottle, I believe. You use it to keep your vulcanite stems from oxidizing. Seems to work well. Olive oil can also be used, but this can turn rancid. I also buy almost exclusively estates. And when they come in they get the royal cleaning. It's the shank and mortise area I find that need the most work. I use rubbing alcohol or isopropanol 91% from the drugstote plenty of Q-tips, pipe cleaners, and paper towels. I will ream down the chamber to bare wood, and do salt / alcohol sits for 7 days as well as alcohol retorts till the fluid comes out clear. Which takes three or four exchanges. Be careful alcohol is flammable and explosive under pressure. I will also rub down the exterior with alcohol dampened paper towels and retreat the wood with carnuba wax, buffing by hand till glossy. As for the vulcanite stem, I will use Brebbia stem polish and or micro-mesh pads till its black and glossy. Then treat with Obsidian Oil after each use to retard oxidation. Hope this helps.

 

lifeon2

Part of the Furniture Now
Jan 19, 2012
625
12
denver co
Looking good smokey be sure and see if there is a harbor freight in your area, you can pick up wet dry sand paper up to 2000 grit there for about 6 bucks a pack and the finer you sand the more the stem will shine.

 

fnord

Lifer
Dec 28, 2011
2,746
8
Topeka, KS
Wonderful effort, Smokey!
Truth be told most of us probably started the same way as you did: print off the instructions and work through them step by step.
The game changer for me was buying a set of micro mesh pads. Those little beauties easily cut my cleaning time in half.
Fnord

 
Status
Not open for further replies.