Why Dunhill Shell Briar Pipes Seem to be So Fragile

Log in

SmokingPipes.com Updates

48 Fresh AKB Meerschaum Pipes
18 Fresh Mastro Geppetto Pipes
4 Fresh Todd Johnson Pipes
12 Fresh Johs Pipes
New Accessories

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

Status
Not open for further replies.

sasquatch

Lifer
Jul 16, 2012
1,689
2,883
All pipes move a little, the briar on an oil cured pipe possibly less so, but briar moves like any wood with humidity change. It is more stable than most because of grain density, orientation, and silicate content, but it still moves. If a pipe is getting tight over time because the briar is shrinking (maybe you live where the relative humidity is 20% lower than where the pipe was made), you need to take physical action, remove a little material from the mortise wall with a rolled up sand paper for example. Bees wax I do like, but if a tenon needs graphite, it's too tight imho, and all you are doing it lubricating it, the briar is still under too much pressure.

I have a couple old shells around here, I find them tremendously stable and tremendously tough, I don't worry about handling or smoking them.
 
Status
Not open for further replies.