How Do I Refresh the LJS Stamp on a Ferndown Stem?

Log in

SmokingPipes.com Updates

New Cigars




PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

ssjones

Moderator
Staff member
May 11, 2011
18,317
11,073
Maryland
postimg.cc
I've tried many ways (foil, crayon, white out, etc). The best way I've learned to trust is using a good acrylic nail polish. But, the stamp has to be deep enough. I'm not certain LJS stamps are deep enough (at least by my experience, very similar to the shallow JU for James Upshall). But, you probably can't do any harm. Dab on a thin coat, over the stamp. (I use a model hobby q-tip tip brush, from Hobby Lobby, pin point tips). LET IT DRY. LET IT DRY, a day or so. Micromesh then to remove the excess. Once done, you can carefully hit around the stamp with White Diamond, if you need to bring up the shine. Sometimes, I'll cut and place a tiny piece of masking tape over the painted logo, to just hit it on a wheel.

Here's a Shamrock using that method.

Shamrock_998_Fin_ (09).jpg