I don't have a pipe rest! I am thinking about making one for home, and one to put in my pocket for traveling. Show me yours.
Homemade Pipe Rests
- Thread starter biz
- Start date
SmokingPipes.com Updates
Watch for Updates Twice a Week
PipesMagazine Approved Sponsor
Site Sponsors
PipesMagazine Approved Sponsor
PipesMagazine Approved Sponsor
PipesMagazine Approved Sponsor
PipesMagazine Approved Sponsor
Thats a czech tool built in? Love the pipe!
Thankee.
I make those from leather for the local B&M. It's a strip of ~3mm English bridle (though any leather with a firm temper would do) 8" long with holes for a Chicago screw on both ends ~1/2" from the edge. I use 12 mm Chicago screws to accomodate the Czech tool which is provided by the B&M itself.
Alternatively, you can just rivet the band into a loop but then you won't be able to insert the Czech tool:
I make both kinds but the ones with the option to insert the tool just proved more popular.
Leather has the advantages that it's light, pliable, durable, looks good, and doesn't scratch the pipes.
Pretty basic I know, but as a bonus you get 12 free eggs.
Two cheap and easy to throw together pipe rests I made for my workshop from a scrap of pallet wood. Nothing fancy, but they do their job. Good weight and wide base so I don’t have to worry about them getting knocked over easily.
Top one is based of a design I saw on Reddit, pallet wood and a bent coat hanger.
Bottom is pallet wood and a scrap of walnut.
How about a ShoeHorn?
Smoking in the garage, these are handy for non-sitters.
Smoking in the garage, these are handy for non-sitters.
Not exactly a rest, but, I took apart some old bar’s peppermint patty dispenser from the 60’s - 70’s a while back, held onto the barrel piece and forgot about it. Then a few months back, found it again, set one of my pipes in it, and the rest is history. Not only do the chambers fit pipes of all sizes, The middle of the piece is empty, so, I can fit filters, pouches of tobacco, small pipes, generally any type of pipe accoutrement within it. There's even a hole drilled in the center of the top piece that can hold a tamper. Goes to show, nearly anything can be turned into piping paraphernalia.
Attachments
Made a Pipe Rack Today :: Pipes Accessories
After seeing some of the wooden creations that Matt (Carolinachurchwarden) has posted, I thought I would give a shot at making something. As you can tell, I've discovered my true calling as a carpenter. Yes I built this myself over several grueling minutes. Believe it or not this is not a high...
pipesmagazine.com
Lets not forget this bespoke masterpiece.
The thing with smoot surfaces is that the pipes will slide on them and eventually tip over. If you want a rest for your desk this might not be too much of an issue, but if you want something for, say, the car, a smooth surface will net you lots of frustration.
Been there myself. Before I got into leather I used a broken off cupholder as a pipe rest in my car. The notch in the cup was 'ideal' for a pipe stem, but the smooth surface made larger pipes go head over heel:
Been there myself. Before I got into leather I used a broken off cupholder as a pipe rest in my car. The notch in the cup was 'ideal' for a pipe stem, but the smooth surface made larger pipes go head over heel:
I've been meaning to reshape the top and finish it for many years. It works, though, so I've left it alone.
I just saw this. I absolutely love the pipe! The shoe horn however dates you.