1894 Calabash Gourd Bowl Replacement

Log in

SmokingPipes.com Updates

New Cigars




PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

PipesMagazine Approved Sponsor

Status
Not open for further replies.

onestop

Lurker
Mar 1, 2020
8
2
I have a Calabash Gourd pipe supposedly made in 1894 with a very badly damaged bowl insert. The top has a sterling silver cap which I've carefully removed and plan on rebuilding. But the bowl itself has no bottom and I'd like to rebuild and replace it. Everything I can find online seems to indicate that plaster /gypsum cement was used back in the day? I'm thinking I'm going to have to crush the remaining bowl and gently separate it from the gourd to then cast a new one. Anyone got any input on this?
 
Jun 9, 2018
4,012
12,928
England
I have 5 calabashes but none are anywhere near as old as yours and they have removable bowls. I do have a Baki Edwardian style silver top but again it has a removable bowl. The only replacement bowls I know of are these on ebay but I don't know if they'd be any good to you. Obviously they'd need to be reshaped/sanded by yourself.
Hopefully someone who refurbishes pipes might have more of an idea how to help you, good luck with it anyway and I hope you can get the pipe back to its former glory.
Meerschaum Bowl For Calabash Or Gourd Block Meerschaum New Handmade #1287 | eBay - https://www.ebay.com/itm/254394197685
 

onestop

Lurker
Mar 1, 2020
8
2
Here are some pics of the pipe in question. It looks as though someone had a go at trying to remove the bowl at some point in it's life...hence the reason I suspect I'll have to crush the existing pipe and sand down the rim of the gourd. I am also having trouble deciphering the markings on the silver band and top cap. Any help with those would be appreciated as well. IMG_20200303_180214.jpg
 

Attachments

  • IMG_20200303_180224.jpg
    IMG_20200303_180224.jpg
    87.9 KB · Views: 5
  • IMG_20200303_180253.jpg
    IMG_20200303_180253.jpg
    67.4 KB · Views: 5
  • IMG_20200303_180301.jpg
    IMG_20200303_180301.jpg
    73.5 KB · Views: 5
  • IMG_20200303_180311.jpg
    IMG_20200303_180311.jpg
    72.8 KB · Views: 6
  • IMG_20200303_180331.jpg
    IMG_20200303_180331.jpg
    84.9 KB · Views: 9
  • IMG_20200303_180421.jpg
    IMG_20200303_180421.jpg
    109.9 KB · Views: 10
  • IMG_20200303_180442.jpg
    IMG_20200303_180442.jpg
    99.9 KB · Views: 10
  • IMG_20200303_180507.jpg
    IMG_20200303_180507.jpg
    147 KB · Views: 11
  • IMG_20200303_180530.jpg
    IMG_20200303_180530.jpg
    130.4 KB · Views: 11
  • Like
Reactions: Kozeman

onestop

Lurker
Mar 1, 2020
8
2
I have 5 calabashes but none are anywhere near as old as yours and they have removable bowls. I do have a Baki Edwardian style silver top but again it has a removable bowl. The only replacement bowls I know of are these on ebay but I don't know if they'd be any good to you. Obviously they'd need to be reshaped/sanded by yourself.
Hopefully someone who refurbishes pipes might have more of an idea how to help you, good luck with it anyway and I hope you can get the pipe back to its former glory.
Meerschaum Bowl For Calabash Or Gourd Block Meerschaum New Handmade #1287 | eBay - https://www.ebay.com/itm/254394197685

I considered meerschaum, but I would have to do a hell of a lot of carving from the standard bowl to retrofit for this particular pipe. I have a sneaking suspicion this one was made from plaster
 
  • Like
Reactions: smudgersmissingleg

BROBS

Lifer
Nov 13, 2019
11,765
40,026
IA
I don’t think any of the bowl is actually still there? Is it?
How much extra space is there on the inside diameter of the silver cap when it’s in place?

I think it may be missing the bowl part completely. If that’s the case a Turkish carver should be able to match your needed dimensions.
 
  • Like
Reactions: smudgersmissingleg

onestop

Lurker
Mar 1, 2020
8
2
I don’t think any of the bowl is actually still there? Is it?
How much extra space is there on the inside diameter of the silver cap when it’s in place?

I think it may be missing the bowl part completely. If that’s the case a Turkish carver should be able to match your needed dimensions.


The bowl is still there as I've removed quite a bit of carbon from the side of the bowl..but the bottom is completely blown out. My current thought is to crush the bowl and remove it...while doing a sympathetic restoration on the finish and casting a new bowl with Hydrostone.
 
Status
Not open for further replies.