I've been wondering if any clenchers have direct experience with a spigot pipe. I've asked elsewhere and done a search here, but most information is 2 or 3 years old at minimum and I was hoping we'd get some fresh input. It seems some say they never fall apart, but some say that they frequently fall apart. Being a clencher, I like a pipe that I can take a apart hot, as you drool a bit. I smoke some pretty heavy pipes, including a RC with a spent 20mm casing, so I'm less worried about the weight of a spigot. What I'm really worried about is the stem separating over a 40 plus minute smoke since I rarely take the pipe out of my mouth. Also, the bent spigots look like they cause the connection to be vertical, so I'm wondering if those are more likely to fall apart on you during a smoke. I tend to smoke straights anyway, so that's fine if so. Lastly, I'm aware that Peterson makes what seems to be some solid looking spigot pipes, and Viking makes a line that look substantially thinner in the metal. Are there other brands or makers doing good spigot pipes? I'd prefer metal, not the acrylic and such that some are using. I tend to prefer artisan makers, but I'm not seeing much in this department. Thanks in advance for any advice and input you may have.