Gluing broken tenon
- Thread starter allosh
- Start date
SmokingPipes.com Updates
Watch for Updates Twice a Week
PipesMagazine Approved Sponsor
Site Sponsors
PipesMagazine Approved Sponsor
PipesMagazine Approved Sponsor
PipesMagazine Approved Sponsor
PipesMagazine Approved Sponsor
- Status
Welcome to the forum.
Find a good repair person and send him the pipe and ask for a delron insert. Gluing is not going to work and this way you can save the original stem. Most repair ops can do this easily and it is money well spent. I usually use Floyd Norwood. Excellent work, quick turn around and very reasonable prices.
http://www.norwoodspiperepair.com/
Find a good repair person and send him the pipe and ask for a delron insert. Gluing is not going to work and this way you can save the original stem. Most repair ops can do this easily and it is money well spent. I usually use Floyd Norwood. Excellent work, quick turn around and very reasonable prices.
http://www.norwoodspiperepair.com/
Those guys summed up your options pretty well. Another route you can take is to just replace the whole stem. I think getting a new insert to keep the original stem would cost the least. Unless you can find a stem/insert and do the work yourself.
- Status